With the ReadyBlock > range of Dense and LightweightAggregate Blocks from CEMEX, you are assured to find the building solution you need. Our blocks can be used with confidence in a wide variety of internal and external applications. Our quality assured manufacture ensures that ReadyBlock > CEMEX READYBLOCK > ή TO BS EN 7713:2003 ֑Aggregate Concrete Masonry Units Category 1 (dense and light-weight aggregates) CATEGORY : AGGREGATE CONCRETE MASONRY UNIT > Ү DIMENSIONAL TOLERANCES : Category D1 (+3mm, -5mm)FlatnessNo Performance DeterminedPlane ParallelismNo Performance Determined units are of a consistent and superior quality tomeet the requirements of all European and British standards. CONFIGURATION : For more information on void configuration, please contact your nearest sales office. COMPRESSIVE STRENGTH : Mean3.6 N/mm > 2 , 7.3 N/mm > 2 Other strengths available on application MOISTURE MOVEMENT COEFFICIENT : = < 0.5 mm/m BOND STRENGTH : Fixed Value, 0.15N/mm > 2 REACTION TO FIRE : Class A1 WATER ABSORPTION : No Performance Determined > WATER VAPOUR PERMEABILITY(EN 1745) : 5/15 Length Height Width GROSS DRY DENSITY : 1410 kg/m > 3 440215140215 NET DRY DENSITY : 1960 kg/m > 3 THERMAL RESISTANCE : 140mm width = Int, 0.18 m > 2 K/W Ext, 0.17 m > 2 K/W215mm width = Int, 0.23 m Block Weights (kg)* 140215 > 2 K/W Ext, 0.22 m > 2 K/W Dry3% Moisture Content 18.728.719.329.6 DURABILITY AGAINST FREEZE-THAW : No Performance Determined DANGEROUS SUBSTANCES : Information on dangerous substances will only be given when and where required and in the appropriate form. > *These figures are a national average and variations may occur geographically,please contact your nearest Sales Office for more precise block weights. ReadyBlock > ծ Sales Office:North:01236 822461 South:01298 22244 Reduced unit weight for ease of handlingՕReduced floor/foundation loadingsAvailable either open textured to provide an excellent medium for surface finishes or close textured for painting ՕCan be used to construct steel - reinforced walls, to resist lateral loadings >

Blocks are normally delivered to site in banded packs oncrane-offload road vehicles. Where requested packs can be delivered shrink-wrapped and/or palletised to aid subsequent site movement activities. All packaging should be disposed of carefully in accordance with local environmental requirements.If possible, delivered blocks should be stacked in plannedlocationson the site. This reduces the double-handling of the blocks.Packs should be stacked carefully onto a prepared, clean,firm area to minimise soiling and damage. They should also be protected from inclement weather and passing vehicles....