With the ReadyBlock > range of Dense and LightweightAggregate Blocks from CEMEX, you are assured to find the building solution you need. Our blocks can be used with confidence in a wide variety of internal and external applications. Our quality assured manufacture ensures that ReadyBlock > CEMEX READYBLOCK > ή TO BS EN 7713:2003 ֑Aggregate Concrete Masonry Units Category 1 (dense and light-weight aggregates) CATEGORY : AGGREGATE CONCRETE MASONRY UNIT > Ү DIMENSIONAL TOLERANCES : Category D1 (+3mm, -5mm)FlatnessNo Performance DeterminedPlane ParallelismNo Performance Determined units are of a consistent and superior quality tomeet the requirements of all European and British standards. COMPRESSIVE STRENGTH : Mean 3.6 N/mm > 2 MOISTURE MOVEMENT COEFFICIENT : = < 1.0 mm/m BOND STRENGTH : Fixed Value, 0.15N/mm > 2 REACTION TO FIRE : Class A1 WATER ABSORPTION : No Performance Determined WATER VAPOUR PERMEABILITY(EN 1745) : 5/15 GROSS DRY DENSITY : 850 kg/m > 3 NET DRY DENSITY : 850 kg/m > 3 Length Height Width THERMAL CONDUCTIVITY : Int, 0.30 W/mKExt, 0.32 W/mK 440215100140 DURABILITY AGAINST FREEZE-THAW : No Performance Determined DANGEROUS SUBSTANCES : Information on dangerous substances will only be given whenand where required and in the appropriate form. Block Weights (kg)* 100140 Dry3% Moisture Content 8.011.38.211.6 > *These figures are a national average and variations may occur geographically,please contact your nearest Sales Office for more precise block weights. ՕDesigned to meet the requirements of the building regulationsManufactured utilising lightweight aggregates for a lighter blockՕMeets the requirements of the manual handling regulationsOpen textured finish provides an excellent medium for surface finishes and fixingsՕDemonstrates a high level of thermal resistance thereby enhancing heat loss thermal calculationsAlso available in 1100 and 1400 densities to provide a range of excellent thermal and acoustic properties ReadyBlock > ծ Sales Office:North:01236 822461 South:01298 22244 >

Blocks are normally delivered to site in banded packs oncrane-offload road vehicles. Where requested packs can be delivered shrink-wrapped and/or palletised to aid subsequent site movement activities. All packaging should be disposed of carefully in accordance with local environmental requirements.If possible, delivered blocks should be stacked in plannedlocations on the site. This reduces the double-handling of the blocks.Packs should be stacked carefully onto a prepared, clean,firm area to minimise soiling and damage. They should also be protected from inclement weather and passing vehicles....