video corpo cad

Cempanel
8Pages

{{requestButtons}}

Catalog excerpts

Cempanel - 1

Cempanel BUILDING BOARD CEMENT PARTICLE BOARD

Open the catalog to page 1
Cempanel - 2

Cempanel Class “0” cement particle board with excellent impact, fire and acoustic properties. Its durability, consistently high manufacturing tolerances and lack of need for wet trades makes Cempanel ideal for off-site and modular construction. Cempanel (cement particle board) is superior to timber and plasterboard panel products when used as internal linings on rainscreen cladding projects (sheathing), general purpose external boarding, floors or studwork interior walls. Cempanel is both stronger and less absorbent than timber and plasterboard. The high cement and alkaline content also...

Open the catalog to page 2
Cempanel - 3

Product Specification Cempanel is an exterior and interior cement particle cladding and lining board that is far superior to timber sheathing. Cempanel does not absorb water and is structurally stronger than timber. Technical Information Specific Properties Standard Board Size Quantities (sheets) per pallet Grey surface with particulate core Length / Width Moisture Content Surface Alkalinity Bending Strength Thermal Conductivity (K Value) Tensile Strength Perpendicular to Plane Dimensional Tolerance Thickness Swelling (Immersed in water 24hrs.) Fire Resistance BS 476 Part 6 and 7....

Open the catalog to page 3
Cempanel - 4

The strengths of Cempanel Cempanel combines the strength of cement with the flexibility of timber. It is resistant to changes in heat and moisture. This quality makes Cempanel fire resistant and a good thermal insulator. Sound reduction Sound insulation can be improved by using insulation between 2 panels. Board thickness 2 layers of board thickness 48mm x 32mm galvanized steel @ 610mm centres 70mm x 32mm galvanized steel @ 600mm centres faced with 100mm x 24mm strips Thermal insulation Having a 0.125 W/mºC K value makes Cempanel cement particle board popular as a lining in temperature...

Open the catalog to page 4
Cempanel - 5

Rainscreen cladding ventilated facade principle 1 Load bearing wall or steel frame 2 Insulation 3 Polyurethane sealant 4 Cempanel a 5mm gap 5 Air gap min 25mm 6 Batten or cladding rail 8 EPDM underlay 90mm 9 Facade screw 4.5 x 36/41 21 Facade board b Joint width 8mm c Edge distance min 30mm Rainscreen cladding insulated render system (Typical detail only. Consult render supplier for fixing details) 1 Load bearing wall or steel frame 2 Light guage steel frame 3 Aluminium sealing tape 4 Cempanel a 5mm gap 9 Self drilling fixing screw 21 Render 22 Insulation

Open the catalog to page 5
Cempanel - 6

Installation & Fixing All fixing holes should be manually drilled with a hole 0.8mm larger than the desired fixing. Fixings Countersunk steel or galvanized self-tapping screws 3.5mm - 4.2mm diameter, 2.5 to 3 times the board thickness. Method – nails screws or staples, manually, pneumatic or power fixed. Site work Cempanel should be cut in the same way as chipboard with tungsten carbide tipped blades at 3000 - 4000 r.p.m. If a highly sanded surface is required e.g. for direct application of paint, conventional hand held wood sanders can be used indoors in conjunction with dust extraction...

Open the catalog to page 6
Cempanel - 7

Conformity Installation details – horizontal Cempanel conforms with the requirements of BS EN 634-1:1997 Cement-bonded particle boards. Specification Requirements for OPC bonded particleboards for use in dry, humid and exterior conditions. Accreditations Insulated Render Systems: Saint Gobain Weber, Maulden Road, Flitwick, Bedford, MK45 5BY. The use of Cempanel will not affect the guarantee offered by Weber. Fixings 50mm from corner Distance between steel stud is as shown in wind load table Bolt Installation details – vertical 15mm if used as sheathing 20mm if used as external cladding...

Open the catalog to page 7
Cempanel - 8

The information contained in this publication and otherwise supplied to users of the company’s products is based on the company’s general experience, best knowledge and belief. However, because of factors beyond the company’s knowledge and control, which can affect the use of the products, no warranty is given or implied with respect to such information. The company’s policy is one of continuous improvement. Cembrit Limited therefore reserves the right to alter specifications at any time and without notice. As with all manufactured materials, appearance of cement particle board may vary...

Open the catalog to page 8

All Cembrit Limited catalogs and technical brochures

  1. Diamond

    6 Pages

  2. Shingles

    6 Pages

  3. B5 Leaflet

    14 Pages

  4. Duquesa

    6 Pages

  5. B5

    8 Pages

  6. Cemwood

    4 Pages

  7. cembonit

    12 Pages

  8. 3.2mm CH

    4 Pages

  9. Cembrit FR

    6 Pages