SPECIAL PERFORMANCE BOARD FOR USE IN DAMP OR HUMID AREAS TAPERED EDGE CEILING TILES AND TILE BACKING BOARDS

Marco Industries Special Performance (SP) boards for wet areas incorporating seamless jointing system Marco S.P. Board is very well suited for ceiling and wall linings to swimming pool areas, changing rooms, gymnasia, commercial kitchens and many other similar moisture sensitive areas. This board and system has been used successfully in these types of applications for over 10 years. The board has been specially manufactured to resist the problems associated with damp and humid areas inside buildings in general but specifically where continuous runs of partition wall or ceiling linings are specified....

Installation Special performance board requires careful installation to ensure that its full potential is realised. In areas where tiling is required, it is essential to comply with the relevant codes of practice on board dryness and the secure and rigid bracing of the boards for tiling. Seamless Joint System A) The Special Performance Board will arrive on site with all four edges tapered but not primed. The board will have a protective film on the face and this must not be removed until the board is ready for pre drillingwith 2mm holes and fixed into position. The special Marco 35mm x 4.2mm...

Because of its strength it is easy to attach different hangers to Special Performance Board. Fastenings for heavy attachments should be centered on internal studwork. For a health and safety data leaflet concerning the Cembrit Ltd product range, please contact the Cembrit Ltd Technical Support Department at the address below. Special performance board is the perfect substrate for tiling and has successfully undergone testing in the UK, the USA and Scandinavia. The tile adhesive should be used according to the manufacturer’s recommendations and applied in vertical bands. The tiles should be bedded...