Compack Living 180°-Technical Manual-Rev11-eng
36Pages

TECHNICAL CONSTRUCTION MANUAL COMPACK LIVING 180° system CELEGON S.r.l. - Via G. Galilei, 6 - 30035 Mirano (Venezia) - T +39 (0)41 5728404 - F +39 (0)41 5728522 www.compackliving.com - info@compackliving.com MTCL180EN - Rev. 11-07/2024

COMPACK LIVING 180° patented The company reserved the right to make, at any time, without prior notice, all technical changes it considers appropriate to improve the quality and the correct functionality of the products. All contents of this manual are covered by copyright. It’s forbidden even partial reproduction of text and drawings, without prior written permission of Celegon s.r.l.. Any abuse will be prosecuted according to law. All right reserved - Duplication or divulgation without autorization is strictly forbidden.

Bonetti Massimo Design COMPACK LIVING 180° patented 1. INTRODUCTION The COMPACK LIVING 180° system opens up new possibilities in interior design. Thanks to its reduced space requirements, silent operation and acoustic insulation properties, COMPACK LIVING 180° offers an alternative to traditional swing doors, doors that slide into or along the wall, accordion doors, and rototranslating doors. Furthermore, COMPACK LIVING 180° may be applied to moveable walls and closets. The COMPACK LIVING 180° system, installed between the top edge of the leaf and the lintel, makes it possible to confine...

COMPACK LIVING 180° patented 2. COMPATIBILITY OF THE COMPACK LIVING SYSTEM SAME DOOR LEAVES Identical size and design

COMPACK LIVING 180° patented 3. USE VARIANTS To get the most out of the variants illustrated on this page, see the specifications for using the COMPACK latch (see Section 7. SPECIAL COMPACK LIVING MAGNETIC LATCH). · Version 1 Symmetric door leaves By using the handle only on one side and the recessed handle on the other, is necessary to apply the magnetic lock COMPACK. Version possible with all available items RIGHT/LEFT. · Version 2 Asymmetric door leaves with handle leaf from -50 to 0 larger By using the handle only on one side and the recessed handle on the other, is necessary to apply...

COMPACK LIVING 180° patented Part list Q.ty Description 1 Compack Living system RH or LH 1 Central hinge lower 1 Lateral hinge lower for leaf RH or LH 1 Lateral hinge lower for jamb RH or LH 4 Screw TSP trx ø 4x20 16 Screw TSP trx ø 4x30 1 Invisible hinge for alignment leaves 1 Magnetic lock Compack Living with strikers and special square spindle (optional) MTCL180EN - Rev. 11-07/2024

COMPACK LIVING 180° patented Vertical section flat casing flat casing Door jamb rabbet side HFM = Wall Hole Height HP = Passage Dimension HA = Leaf Height (*) Leaf/track cover moulding thickness ratio leaf thickness flat casing thickness 36 ÷ 40 10 ÷ 14 42 10 ÷ 12 44 10 MTCL180EN - Rev. 11-07/2024 Part list Q.ty Description 1 Compack Living 180 system RH or LH 1 Lateral hinge lower for leaf RH or LH 1 Lateral hinge lower for jamb RH or LH 1 Upper crossbeam

COMPACK LIVING 180° patented Horizontal section left door Example of Left Door (Right door is symmetric) LFM ES= LFM-20 (= length of the upper crossbeam) 40 Door jamb rabbet side Door jamb rabbet side flat casing L handle leaf flat casing flat casing Wall Hole Width Outer Jamb Door Jamb Opening Leaf Width (*) Leaf/track cover moulding thickness ratio leaf thickness flat casing thickness 36 ÷ 40 10 ÷ 14 42 10 ÷ 12 44 10 8 Part list Q.ty Description 1 Central hinge lower 1 Lateral hinge lower for leaf RH or LH 1 Lateral hinge lower for jamb RH or LH 1 Magnetic lock Compack Living with...

COMPACK LIVING 180° patented Dimensional diagram of the door - symmetric leaves (Version 1) Version 1 - symmetric leaves Wall Hole Width Passage Dimension Encumbrance in opening Encumbrance on the wall Example of Left Door (Right door is symmetric) X (compatible with 90°) L** hinge leaf (**) Hinge leaf and handle leaf widths are calculated with a reciprocal distance of 1 mm. MTCL180EN - Rev. 11-07/2024

COMPACK LIVING 180° patented Dimensional diagram of the door - asymmetric leaves (Version 2) Handle leaf from -50 to 0 larger Version 2 - asymmetric leaves (handle leaf from -50 to 0 larger) LFM Wall Hole Width Passage Dimension Encumbrance in opening Encumbrance on the wall Example of Left Door (Right door is symmetric) X (compatible with 90°) L** hinge leaf (**) Hinge leaf and handle leaf widths are calculated with a reciprocal distance of 1 mm.

COMPACK LIVING 180° patented Dimensional diagram of the door - asymmetric leaves (Version 3) Handle leaf from 0 to +200 lower Version 3 - asymmetric leaves (handle leaf from 0 to +200 lower) LFM This variant also allows using a double handle or a double knob with a traditional lock, when the door's protrusion allows this. Wall Hole Width Passage Dimension Encumbrance in opening Encumbrance on the wall Example of Left Door (Right door is symmetric) V X (compatible with 90°) L** hinge leaf (**) Hinge leaf and handle leaf widths are calculated with a reciprocal distance of 1 mm. MTCL180EN - Rev

COMPACK LIVING 180° patented 4. DIMENSIONAL SUMMARIES 4.1 Single opening door The following form is a summary all of possible realizable dimensions with the measurements. The COMPACK LIVING 180° system foresee a minimum wall opening (LFM) of 700 mm with symmetric leaves and of 650 mm with asymmetric leaves. The maximum wall opening (LFM) with symmetric leaves is 1100 mm. For measuremnts of LFM larger than 1100 mm is necessary to increase the dimensions of the handle door leaf. Summary dimensions for single opening door Version 1 - symmetric leaves Wall Hole Passage Fix Working Variable...

COMPACK LIVING 180° patented Dimensional diagram of the double opening door Dimensional example Attention: you need to use two hardwares COMPACK LIVING, one right and one left. 40 = difference between handle door leafwidth and hinge door leaf Double Wall Opening Width External Jamb Double (LFMD-23) Light Jamb Double (LFMD-103) Width Passagge Double Door Leaf