PVC Foams

PVC Foams

Product catalog summary
Introduction
This document provides technical specifications for PVC foam cores used in various applications, highlighting their mechanical performance characteristics.

Specifications
  • Types and Colors: PVC foam cores are available in different types, each identified by a specific color: PVC48 (Lilac), PVC60 (Yellow), PVC80 (Green), PVC100 (Red), PVC130 (Blue), and PVC200 (Brown).
  • Nominal Sheet Size: The sheet sizes vary by type, ranging from 1270x2730x80 mm for PVC48 to 750x1600x48 mm for PVC200.
  • Nominal Density: Measured in kg/m³, densities range from 48 for PVC48 to 200 for PVC200, as per ASTM D1622.

Mechanical Performance
  • Compressive Strength: Ranges from 0.48 MPa for PVC48 to 4.64 MPa for PVC200, tested according to ASTM D1621-10.
  • Compressive Modulus: Values range from 18 MPa to 198 MPa, indicating the material's stiffness under compression.
  • Operating Temperature: The cores can operate between -40°C to +80°C.
  • Tensile Strength: Varies from 0.66 MPa to 5.61 MPa, tested using ASTM D1623.
  • Tensile Modulus: Ranges from 57 MPa to 343 MPa, reflecting the material's resistance to deformation under tension.
  • Shear Strength: Measured from 0.49 MPa to 3.23 MPa, according to ASTM C273.
  • Shear Modulus: Values range from 12 MPa to 74 MPa, indicating the material's rigidity under shear stress.
  • Shear Elongation at Break: Percentage elongation ranges from 9% to 41%, showing the material's ductility.

Conclusion
The document outlines the critical mechanical properties of PVC foam cores, providing essential data for selecting the appropriate type for specific applications. The information is crucial for engineers and designers in materials engineering and related fields.
See more

Catalog excerpts

PVC Foams-1

Via Buozzi 25 - 40057 Cadriano (Bologna) Italy Tel. +39 051 782505 Fax +39 051 782477 www.cel.eu [email protected] P.IVA 04102600378 CCIAA BO 0339628 ALUMINIUM AND THERMOPLASTIC HONEYCOMBS, LAMINATES, SANDWICH PANELS PVC foam coresMechanical performance Type LIABILITY DISCLAIMER: The above data are to the best of our knowledge correct and are intended to give information about our products and the potential applications. No warranty is given or implied in respect of certain properties of the products or their suitability for a particular applicatio We reserve the right for technical changes without further notice. We guarantee impeccable product quality under our terms of sale.

 Open the catalog to page 1

All Cel Components S.r.l. catalogs and technical brochures

  1. CLEARSTEP

    2  Pages

  2. Alustep 500

    2  Pages

  3. PVC-STEP

    1  Page

  4. PETSTEP

    1  Page

  5. POLISTEP

    2  Pages

  6. Alustep F

    2  Pages

  7. Alustep FN

    3  Pages

  8. COMPOCEL® W

    1  Page

  9. COMPOCEL® WF

    2  Pages

  10. Vacuum Table

    1  Page

  11. PMI Foam

    2  Pages

  12. PET GR Foam

    1  Page

  13. Nomex®

    2  Pages

  14. CLEARPET

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.