*myarchiexpo

POLISTEP

Product catalog summary

Technical Specifications:
The document provides technical specifications for sandwich panels with skins made of glass fibre impregnated with epoxy resin and a core made of polypropylene honeycomb. The panel thickness ranges from 6 mm to 60 mm, with standard dimensions of 1180x2480 mm or 1500x3000 mm. Thickness tolerance is ±0.4 mm, and dimension tolerance is ±30 mm. The skins have a thickness of 0.4 mm and a glass fibre density of 500 gr/m².

Panel Physical and Mechanical Performances:
The panel weight varies with thickness, ranging from 2.4±0.2 Kg/m² for 6 mm thickness to 4.7±0.2 Kg/m² for 35 mm thickness. Compressive stabilised strength is 1.6 ± 0.3 Mpa. Maximum load capacity increases with thickness, from 220±20 N for 6 mm to 1250±100 N for 35 mm. Deflection at maximum load decreases with thickness, from 53±6 mm for 6 mm to 8±1 mm for 35 mm. The skins' elastic modulus is 24,000±1,000 Mpa, and the moment of inertia increases with thickness.

Additional Characteristics:
The panels have a middle resistance to peeling greater than 450 N/76 mm or 50 Nmm/mm. The maximum service temperature ranges from -40°C to +75°C, and the thermal expansion coefficient is approximately 1.5 - 3.5*10^-5 °C-1.

Disclaimer:
The document includes a liability disclaimer stating that the data provided is to the best of the company's knowledge and is intended to inform about the products and their potential applications. No warranty is given regarding the properties or suitability for specific applications, and technical changes may occur without notice.

Catalog excerpts

Via Buozzi 25 - 40057 Cadriano (Bologna) Italy Tel. +39 051 782505 Fax +39 051 782477 www.cel.eu [email protected] P.IVA 04102600378 CCIAA BO 0339628 ALUMINIUM AND THERMOPLASTIC HONEYCOMBS, LAMINATES, SANDWICH PANELS Panel's composition Impregnated with epoxy resin - Thickness: 0,4 mm Polypropylene honeycomb Technical data sheet for standard panels (dimensions, materials and special finishes on request) * Tested by Certificating Institute ** Tested by Internal Laboratory *** Approximate value t Sample dimension with 4 support points (L,W) 540 mm x 50 mm LIABILITY DISCLAIMER: The above data are to the best of our knowledge correct and are intended to give information about our products and their potential applications. No warranty is given or implied in respect of certain properties of the products or their suitability for a particular application. We reserve the right for technical changes without further notice. We guarantee impeccable product quality under our terms of sale.

Open the catalog to page 1

CEL Components S.r.l. Via Buozzi 25 - 40057 Cadriano (Bologna) Italy Tel. +39 051 782505 Fax +39 051 782477 www.cel.eu [email protected] P.IVA 04102600378 CCIAA BO 0339628 ALUMINIUM AND THERMOPLASTIC HONEYCOMBS, LAMINATES, SANDWICH PANELS Standard dimensions (other dimensions available on request) - Dimension tolerance ±30mm LIABILITY DISCLAIMER: The above data are to the best of our knowledge correct and are intended to give information about our products and their potential applications. No warranty is given or implied in respect of certain properties of the products or their suitability for a particular...

Open the catalog to page 2

All Cel Components S.r.l. catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list