TDS CBG FirePan 50-90_EN
1Pages

CBG FirePan 50/90 TDS No. 7200 Fire-resistant composite sandwich core panel on basalt and ceramic basis for the production of fire-resistant constructions in the sphere of building construction and container construction, as well as comparable application ✓ ✓ ✓ ✓ ✓ ✓ 100% natural non-combustible no smouldering no smoke in case of fire heat-insulating sound-insulating mechanically loadable moisture-resistant vibration-absorbing corrosion-resistant chemically neutral recyclable Properties Description Application area Weight per unit area, [kg/m²] Gross thickness, [mm] Material Density [kg/m³] Compressive strength according to EN 826 [kPa]: Tensile strength according to EN 1607 [kPa] Fire class Inorganic content [%]: Thermal stability, °C Connections within the construction Surface *: Width * / Length * Data Composite-Sandwich-Core-Panel e.g. production of refractory building structures 14,7 ± 10% with moisture content – max. 4 % 50 ± 1 ceramic basalt fiber and grid laminate, specific mineral wool (basalt fibers), inorganic fire protection adhesive Cerammatrix 01-50 290 ± 10% 100 ± 10 30 ± 5 F-90 (pretested according to DIN EN-13501-2) approx. 99 1.300 e.g. tongue and groove, mounting rails, screws and other mounting materials Ceramic basalt fibre laminates (option: coated with CPL decorative layer in various colours, flame retardant according to DIN EN 13501) up to 1200 ± 1 mm / up to 2980 ± 2 mm Delivery * - Various sizes and surfaces are possible on request ✓ Delivery on pallets wrapped with stretch film ✓ Connecting strips and adhesives are available upon request Processing and storage ✓ Can be processed with standard cutting tools ✓ The usual protective measures must be taken during processing. Gloves, respiratory protection and safety glasses are recommended. Please note the instructions for use "Handling mineral wool and insulation materials (glass wool, rock wool)" from BG Bau and/or local legal regulations ✓ Horizontal storage, e.g. on pallets, on a level surface, secure against slipping Subject to modifications CBG Composites GmbH Egerpohl 2 D-51688 Wipperfuerth / Germany The technical information on our products reflects the state of our knowledge at the time of printing. Therefore, the latest edition of the data sheet should always be used, as our experience and knowledge are constantly evolving. In case of doubt please contact us. The application shown is only exemplary and may vary in individual cases. It is therefore not relevant for liability. Our general terms and conditions appl