1. Catalogs
  2. CBG Composites
  3. Ceramic glass fiber laminate based on inorganic matrix with endothermic effect

Ceramic glass fiber laminate based on inorganic matrix with endothermic effect

Ceramic glass fiber laminate based on inorganic matrix with endothermic effect

Product catalog summary
Product Overview: The document provides technical information on a ceramic glass fiber laminate based on an inorganic matrix with an endothermic effect, primarily used in the building industry and engineering. It is characterized by being 100% natural, inert, antibacterial, corrosion-resistant, thermoresistant, highly loaded, non-combustible, and inorganic.
Specifications:
  • Weight per unit area: 300 g/m² for TDS-3010 and 420 g/m² for TDS-3012, with a tolerance of +/-15%.
  • Warp and Weft: Both have a tex of 68 and 600 respectively, with ends in warp and weft being 17.2 and 12 for TDS-3010, and 25 and 24 for TDS-3012.
  • Basic Material: E-glass with ceramic glaze.
  • Matrix: 30% with a tolerance of +/-15%.
  • Width: 123 cm with a tolerance of +/-2 cm.
  • Binding: Canvas.
Storage and Shelf Life:
  • Store in a dry place, protected from moisture and heat, at temperatures between 15 - 30°C.
  • Shelf life is 3 to 6 months at room temperature when packed in protective foil.
Safety and Processing Instructions:
  • Follow guidelines issued by the chemical industry and employers' liability insurance association, along with safety data sheets.
  • Condition the product for 24 hours to the processing temperature before use.
  • Use protective gear such as gloves, breathing protection, and safety glasses during processing.
  • Store horizontally on pallets on a level surface, secured against slipping.
Delivery: Various sizes are available upon request, and products are delivered on pallets wrapped with stretch film.
General Remarks: The data provided is based on tests and investigations and is intended for informational purposes. Users must verify the product's suitability for their specific applications through their own tests.
See more

Catalog excerpts

Ceramic glass fiber laminate based on inorganic matrix with endothermic effect-1

Ceramic glass fiber laminate based on inorganic matrix with endothermic effect TDS-No. 3100 Application areas - building industry and engineering ✓ 100% natural and inert ✓ antibacterial ✓ corrosion-resistant ✓ thermoresistant Delivery ✓ - Various sizes are possible on request ✓ Delivery on pallets wrapped with stretch film Processing and storage ✓ The usual protective measures must be taken during processing. Gloves, breathing protection and safety glasses are recommended ✓ When handling and storing the product, the general occupational health and safety instructions must be observed ✓ Storage horizontal, e.g. on pallets, on a level surface, secured against slipping The technical information on our products reflects the state of our knowledge at the time of printing. Therefore, the latest edition of the data sheet should always be used, as our experience and knowledge is constantly evolving. In case of doubt please contact us. The application shown is only exemplary and may vary in individual cases. It is therefore not relevant for liability. Our general terms and conditions apply, which can also be found on our homepage

 Open the catalog to page 1
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.