CBG PgBE

CBG PgBE

Product catalog summary
Product Overview
Ceramic basalt fiber laminate based on an inorganic matrix with an endothermic effect is designed for use in the building industry and engineering. It is 100% natural, inert, antibacterial, corrosion-resistant, thermoresistant, highly loaded, non-combustible, and inorganic.

Specifications
  • Weight per unit area: LtBC-245 (350 g/m²), LtBC-480 (690 g/m²)
  • Warp and Weft: 1200 tex
  • Ends in warp: 10-22 threads/10cm
  • Ends in weft: 10-18 threads/10cm
  • Basic material: Basalt + ceramic glaze
  • Matrix: 30% +/- 15
  • Width: 123 cm +/- 4
  • Binding: Canvas

Storage and Shelf Life
  • Store dry, protect from moisture and heat, at 15 - 30°C
  • Shelf life: 3 to 6 months at room temperature, packed in protective foil

Safety and Processing Instructions
  • Follow chemical industry guidelines and safety data sheets
  • Condition product for 24 hours to processing temperature before use
  • Use protective gear: gloves, breathing protection, and safety glasses
  • Store horizontally on pallets, secured against slipping

Delivery Options
  • Various sizes available on request
  • Delivered on pallets wrapped with stretch film

General Remarks
The information provided is based on tests and investigations. Users must verify the product's suitability for their specific purposes through their own tests.
See more

Catalog excerpts

CBG PgBE-1

Ceramic basalt fiber laminate based on inorganic matrix with endothermic effect TDS-No. 3200 Application areas - building industry and engineering ✓ 100% natural and inert ✓ highly loaded Delivery concept ✓ - Various sizes are possible on request ✓ Delivery on pallets wrapped with stretch film Processing and storage ✓ The usual protective measures must be taken during processing. Gloves, breathing protection and safety glasses are recommended ✓ When handling and storing the product, the general occupational health and safety instructions must be observed ✓ Storage horizontal, e.g. on pallets, on a level surface, secured against slipping The technical information on our products reflects the state of our knowledge at the time of printing. Therefore, the latest edition of the data sheet should always be used, as our experience and knowledge are constantly evolving. In case of doubt please contact us. The application shown is only exemplary and may vary in individual cases. It is therefore not relevant for liability. Our general terms and conditions apply, which can also be found on our homepage

 Open the catalog to page 1
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.