Catalog excerpts
CBG Grid laminate Style TDS-No. 3500 The grid laminate Style is a glass fibre epoxy laminate with an open grid structure. In combination with other RTM (resin transfer moulding) components, material can be saved, costs reduced and component quality increased. Application example: reinforcement for production of wind power plants, concrete reinforcement, bridge and road construction. ✓ corrosion resistant ✓ antibacterial Delivery ✓ Delivered as sheet products wrapped in film ✓ Various thickness, sizes, surfaces and colours are available on request Processing and storage ✓ The usual protective measures must be taken during processing. Gloves and safety glasses are recommended. ✓ Storage horizontal, e.g. on pallets, on level surface, secure against slipping The technical information on our products reflects the state of our knowledge at the time of printing. Therefore, the latest edition of the data sheet should always be used, as our experience and knowledge are constantly evolving. In case of doubt please contact us. The application shown is only exemplary and may vary in individual cases. It is therefore not relevant for liability. Our general terms and conditions apply, which can also be found on our homepage.
Open the catalog to page 1All CBG Composites catalogs and technical brochures
-
CBG SeaPan WP 25/G2 Pages
-
SeaPan WP 501 Pages
-
CBG SilencePan 25/G1 Pages
-
SeaPan WP 30/601 Pages
-
SeaPan FF 30/601 Pages
-
CBG BCR Rebar1 Pages
-
CBG BCR Grid1 Pages
-
CBG-Basalt-Fiber chops1 Pages
-
CBG Basalt Roving1 Pages
-
TDS CBG FirePan 50-90_EN1 Pages
-
TDS CBG FirePan 25-30_EN1 Pages
-
TDB CBG EasyPan-100_EN1 Pages
-
TDB CBG EasyPan-75_EN1 Pages
-
TDB CBG EasyPan-50_EN1 Pages
Archived catalogs
-
CBG-Basalt fabric1 Pages
-
CBG PgGE1 Pages
-
CBG PgBE1 Pages
-
CBG Basaltfiber laminate1 Pages
-
CBG Glass fiber laminate1 Pages
