CBG BCR Grid

CBG BCR Grid

Product catalog summary
Product Overview
CBG BCR Grid is a basalt composites reinforcement grid designed for use in road construction and architecture. It is made from continuous basalt fibers, offering a range of benefits including being 100% natural, ultralight, ultrastrong, corrosion-resistant, and ecological.

Key Features
  • Resistant to aggressive substances such as alkaline solutions
  • Low heat conductivity and non-magnetic
  • Dielectric, waterproof, and vibration resistant
  • Operational temperature range from -70°C to +200°C
  • Non-combustibility class B1 and smoke generation class S2

Technical Specifications
  • Mesh sizes available: 50x50 mm, 100x100 mm, 150x150 mm, 200x200 mm
  • Specific gravity ranges from 0.066 to 0.26 kg/m²
  • Stem diameter options: 2 mm and 3 mm
  • Tensile strength: 1200 MPa
  • Modulus of elasticity in tension: 30,000 – 40,000 MPa
  • Modulus in flexure: 30,000 – 35,000 MPa
  • Water absorption: ≤ 0.05%
  • Thermal conductivity coefficient: 0.46 W/mK
  • Elongation coefficient: 2.5 - 3.0%

Delivery and Processing
  • Available in rolled or flat variations
  • Robust against temperature fluctuations, suitable for outdoor storage
  • Processed with standard cutting tools
  • Compliance with occupational health and safety instructions is required during handling and storage

Additional Information
The technical specifications reflect the state of knowledge at the time of printing and are subject to change. For the latest information, refer to the most recent data sheet or contact the company directly.
See more

Catalog excerpts

CBG BCR Grid-1

Carbon Basalt Glas CBG BCR Grid TDS-No. 1400 Basalt composites reinforcement grid CBG BCR Grid is an innovative, environmentally friendly product made of continuous basalt fibres. The product is used in road construction and architecture, for example to reinforce bed joints, floors, foundations, multi-layer masonry and the road surfaces. ✓ non-magnetic ✓ dielectric ✓ waterproof ✓ vibration resistant ✓ ecological ✓ 100% natural ✓ ultralight ✓ ultrastrong ✓ corrosion resistant ✓ resistant to aggressive substances, e.g alkaline solutions ✓ low heat conductivity Delivery * - possible variations - rolled or flat Processing and storage ✓ The material is robust and resistant to temperature fluctuations (frost, hot climate, etc.) ✓ Storage under open sky is possible ✓ When handling and storing the product, the general occupational health and safety instructions must be observed ✓ The material is processed with standard cutting tools ^ CBG Composites GmbH Egerpohl 2 D-51688 Wipperfuerth / Germany ^ www.cbg-composites.de The technical specifications of our products reflect the state of our knowledge at the time of printing. Therefore, the latest edition of the data sheet should always be used, as our experience and knowledge are constantly evolving. In case of doubt please contact us. The application shown is only exemplary and may vary in individual cases. It is therefore not liable. Our general terms and conditions apply, the latest version of which can be downloaded on our home

 Open the catalog to page 1
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.