1. Catalogs
  2. CBG Composites
  3. CBG Basalt Roving

CBG Basalt Roving

CBG Basalt Roving

Product catalog summary
Introduction
CBG Basalt Roving is a high-technology material known for its high strength, excellent mechanical properties, wide thermal application range, high chemical resistance, low thermal conductivity, and high electrical resistance. It is 100% natural, antibacterial, corrosion-resistant, thermoresistant, noncombustible, non-smouldering, and recyclable.

Specifications
  • Material: Basalt rock
  • Nominal linear density: 600, 1200, 2400, 4800 tex
  • Monofilament diameter: 10, 13, 17 µm
  • Linear breaking load: 650, 600, 550 mN/tex
  • Elongation at break: 2.0 – 4.5%
  • Tensile strength: >3100 MPa
  • Density: 2600 – 2800 kg/m³
  • Moisture content: <1.0%
  • Loss weight at ignition: 0.4%
  • Heat capacity: 0.031 – 0.038 W/mK
  • Application temperature: -250 to +650 ºC

Application Areas
Basalt roving is used in reinforced grids for road construction, reinforced bars and fixes, technical fabrics, composite pipes, tanks, and cables.

Delivery and Storage
  • Transportation should use covered vehicles to prevent moisture absorption.
  • Store in a dry place in original packaging with air humidity not exceeding 80%.

Processing and Safety
Follow general occupational health and safety instructions during handling and storage.

Note
The technical information reflects the state of knowledge at the time of printing and is subject to change. For the latest data, refer to the most recent edition of the data sheet.
See more

Catalog excerpts

CBG Basalt Roving-1

Carbon Basalt Glas Basalt roving is a modern high-technology material which provides high strength, good mechanical properties, large thermal range of application, high chemical resistance, low thermal conductivity and high electrical resistance. ✓ noncombustible ✓ no smouldering ✓ recyclable ✓ 100% natural ✓ antibacterial ✓ corrosion resistant ✓ thermoresistant Delivery ✓ Transportation should be carried out by using covered vehicles to prevent absorption of moisture Processing and storage ✓ When handling and storing the product, the general occupational health and safety instructions must be observed ✓ Storage in a dry place in original packaging, air humidity content should not exceed 80% www.cbg-composites.de [email protected] CBG Composites GmbH Egerpohl 2 D-51688 WipperfUrth / Germany Tel: 02267-67-0 Fax: 02267-67-222 The technical information on our products reflects the state of our knowledge at the time of printing. Therefore, the latest edition of the data sheet should always be used, as our experience and knowledge are constantly evolving. In case of doubt please contact us. The application shown is only exemplary and may vary in individual cases. It is therefore not relevant for liability. Our general terms and conditions apply, which can also be found on our homepage.

 Open the catalog to page 1
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.