302.7D CR Mini Hydraulic Excavator
2Pages

{{requestButtons}}

Catalog excerpts

302.7D CR Mini Hydraulic Excavator - 1

Cat® 302.7D CR Mini Hydraulic Excavator Engine Model Rated Net Power (ISO 9249) Gross Power Displacement _ Blade Yanmar 3TNV76 Width • Engine meets U.S. EPA Tier 4 Final/EU Stage V emission standards. Weight Operating Weight with Cab 2830 kg 6,239 lb Operating Weight with Canopy 2737 kg 6,034 lb Travel System Travel Speed Gradeability Service Refill Capacities Fuel Tank Capacity 35.2 L 9.3 gal Hydraulic Tank Capacity 26.5 L 7 gal Hydraulic System_ Pump Flow @ 2,500 rpm 89.4 L/min Operating Pressure - Equipment 225 bar Operating Pressure - Travel 225 bar Operating Pressure - Swing 206 bar Auxiliary Circuits Primary 52.2 L/min at 206 bar Maximum Bucket Force 22.5 kN Maximum Stick Force Standard/Long 15.4 kN/ STANDARD EQUIPMENT_ ■ 1-way and 2-way (combined function) auxiliary hydraulic lines ■ 300 mm rubber track ■ Canopy with Tip Over Protection (TOPS) ISO 12117 ■ Dozer blade with float function ■ Hydraulic oil cooler Additional hydraulic circuit diverted from bucket cylinder Auto idle (Standard in North America) Bio oil Boom check valve ■ Cab, radio ready with FOPS ISO 10262 (Level 1), Tip Over Protection (TOPS) ISO 12117, heater/defroster, interior light and windscreen wiper Custom color paint Ecology drain for engine oil Ecology drain for hydraulic tank ■ Maintenance free battery Retractable seat belt Suspension seat, vinyl covered Travel pedals Working light mounted to boom Front screen guard for cab and canopy ■ Joystick mounted proportional auxiliary control ■ Mechanical quick coupler Mirror pack Rotating beacon Suspension seat, fabric covered ■ Thumb ready stick (Standard in North America)

Open the catalog to page 1
302.7D CR Mini Hydraulic Excavator - 2

Lift Point Radius * The above loads are in compliance with hydraulic excavator lift capacity rating standard ISO 10567:2007 and they do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity. The excavator bucket weight is not included on this chart. 1 Height 2 Width 3 Transport length (arm lowered) 4 Maximum digging depth 5 Maximum vertical dig depth 6 Maximum dig height 7 Maximum dump height 8 Maximum reach 9 Maximum reach at ground level 10 Tail swing radius 11 Track width 12 Minimum front linkage swing radius 13 Maximum dozer lift height 14 Maximum dozer dig depth 15...

Open the catalog to page 2

All CATERPILLAR catalogs and technical brochures

  1. 730-EJ

    14 Pages

  2. 725

    16 Pages

  3. catalogue

    36 Pages