MInislide sliding systems

Product catalog summary

Product Overview

The MINISLIDE is a compact sliding door system designed primarily for interior use, suitable for residential applications and office partitions. It can be installed on walls, ceilings, or glass panels, allowing the sliding door to move very close to the wall or fixed panel, minimizing air gaps.

Key Specifications

Glass Thickness: 8 - 10 mm
Maximum Door Weight: 80 kg
Door Width Range: 750 - 1500 mm

The system includes glass clamps that do not require any glass notching. These clamps feature an anti-raising mechanism and allow up to 3.5 mm of vertical height adjustment.

Features

Installation options: wall-mounted, ceiling-mounted, or glass-mounted
Soft close mechanism available in single or double configurations
Sliding door moves very close to the wall or fixed panel for a sleek appearance
Height adjustment of clamps: ±3.5 mm
Anti-derailment safety device integrated into clamps

Finishes

Natural anodized aluminum (silver)
Aluminum anodized to resemble stainless steel

Dimensions and Installation Parameters

Several dimensional formulas and recommended values are provided for door width and track lengths, including:

W2 (outer width) = W1 (door width) + 60 mm
L (track length) = 2 x W1 - 10 mm
Recommended minimum W2 is 750 mm; if less, W2 and W4 values should be reduced equally

Product Sets and Accessories

4-401 / 4-411 / 4-409 / 4-404 / 4-402 / 4-412: Sliding wing sets including 2 clamps, 2 buffers, and 1 floor guide
4-472: Sliding wing set without soft-close, including a 4 m upper track, 2 clamps, 2 buffers, and 1 floor guide
4-473: Sliding wing set with double soft-close, including a 4 m upper track, 2 clamps, 2 buffers, 2 dampers, and 1 floor guide
Additional accessories: upper tracks (4 m length), fixed panel guides (4 m length), floor guides, and pairs of end caps

Installation Recommendations and Notes

The clamps do not require glass fabrication such as notching, simplifying installation
Soft close options enhance door operation and can be selected as single or double soft close
Height adjustment allows precise alignment of the door
Anti-derailment mechanism ensures safety and stability during sliding

Contact Information

Manufacturer: Casma SRL
Address: Via Primo Maggio, 86, 20013 Magenta (MI), Italy
Phone: +39 02 97298418
Fax: +39 02 97299006
Email: [email protected]
Website: www.casma.it

Catalog excerpts

MINISLIDE SISTEMA SCORREVOLE COMPATTO Compact sliding system Sistema deslitante compacto

Open the catalog to page 1

Indicato per interni, applicazioni residenziali o partizioni di ufﬁci It is ideal for interiors, residentials and ofﬁce partitions installations. Ideal para installaciones en interiores, residencial y para divisiones oﬁcinas Installabile a parete, a sofﬁtto o a vetro It can be installed either against the side wall or to the ﬁxed panels Puede ser instalado a pared, a techo o a vidrio L’anta scorre molto vicino al muro o al pannello ﬁsso lasciando poca aria The glass panels slide very tight to the wall or to the ﬁxed panel La hoja en vidrio desliza muy cerca de la pared o del vidrio ﬁjo I morsetti...

Open the catalog to page 3

4-472 = sistema carrelli con doppio soft close 4-473 = sistema carrelli senza soft close * VALORI CONSIGLIATI PER W2 < 750 RIDURRE DI EGUALE MISURA I VALORI DI W2 e W4

Open the catalog to page 4

Set per un’anta scorrevole comprendente: 2 pinze, 2 fermi e 1 guida a pavimento Sliding wing set comprising: 2 clamps, 2 buffers, 1 ﬂoor guide Set para una hoja deslitante que incluye: 2 pinzas, 2 topes, 1 guia a piso Guida superiore in barre da 4 m Upper track in 4m length Riel superior en tramos de 4m Guida a pavimento Floor guide Guía a piso Set con doppio soft close e relativi accessori Set with double soft close and its accessories Set con doble soft-close y los accessorios Guida per pannelli ﬁssi in barre da 4 m Fixed panels in 4m length Guía para los paneles ﬁjos en tramos de 4m Coppia...

Open the catalog to page 7