*myarchiexpo

C5 XP

Product catalog summary

Overview
The C5XP is a new multipurpose hydraulic crawler drill rig designed by Casagrande for applications such as micro-piles, anchor drilling, and jet grouting. It is compact and easy to maneuver, making it suitable for use in confined spaces like tunnels and buildings. The rig features a modular mast and a "Front The Wall" joint articulation.

Power and Control
The C5XP is equipped with a PLC that manages power distribution to enhance performance and reduce fuel consumption. The hydraulic system is "Full Load Sensing" with electro-proportional control, allowing for customizable setup via smart software according to project needs.

Technical Specifications

Undercarriage: Width 1800 mm, track shoes width 300 mm, track length 2380 mm, travel speed 2 km/h, max gradeability 20°/37%, ground pressure 69 kPa.
Engine: DEUTZ TCD 3.6 L04, compliant with EU Stage IIIA/IIIB and US EPA TIER III/IVi standards, rated power 85 kW at 2000 rpm, fuel tank capacity 100 l, hydraulic oil tank capacity 300 l.
Mast Options: Lengths of 3000 mm, 4000 mm, and 5000 mm with corresponding stroke lengths of 1500 mm, 2500 mm, and 3500 mm. Extraction and crowd force of 50 kN, with speeds of 9/37 m/min.
Clamps: Diameter range 40-254 mm, clamping force 145 kN.
Rotary Head: Max torque 12170 Nm (T14EP) and 7200 Nm (T10 2V), max speed 57-440 rpm and 80-160 rpm respectively.
Dimensions and Weight: Length 5400/6400 mm, width 1800 mm, height 2675 mm, weight approximately 8.5 t.

Optional Features

Additional rotary heads and hammer options.
Casagrande external hammer D21.
Rotary head side movement.
Service winch with 900 kg line pull.
Hydraulic chuck and jet system.
Extendable undercarriage (1600/2200 mm).
Flushing, foam, and mud pumps with specified capacities and pressures.

Transport and Movement
The C5XP is designed for easy transport and maneuverability, featuring special kinematics for mast movements and jet grouting arrangements.

Catalog excerpts

HYDRAULIC CRAWLER DRILL P E R F O R AT R I C E I D R A U L I C A

Open the catalog to page 1

HYDRAULIC CRAWLER DRILL C5XP is the brand new multipurpose crawler drill rig designed by Casagrande to perform micropiles, anchors drilling and jet grouting. The crawler rig is equipped with modular mast, articulation with “Front The Wall” joint. It is such small and easy-to-use so that it can work in narrow spaces such as tunnels or inside buildings. A PLC controls the power distribution in order to increase the performance and to reduce the fuel consumption. The hydraulic system is “Full Load Sensing” with electro-proportional control arrangement; a smart software allows the set-up to be personalized...

Open the catalog to page 2

TECHNICAL SPECIFICATIONS DATI TECNICI HYDRAULIC CRAWLER DRILL CARATTERISTICHE CARRO Overall width of undercarriage Larghezza sottocarro Track shoes width Larghezza pattini Overall track length Lunghezza cingoli Travel speed Ground pressure Pressione speciﬁca al suolo Engine conforms to Exhaust Emission Standard Motore conforme agli standard di emissione Fuel tank capacity Capacità serbatoio gasolio Hydraulic oil tank capacity Capacità serbatoio olio idraulico EU Stage IIIA / IIIB - US EPA TIER III / IVi 85 kW 100 l 300 l 3000MR* Mast length Lunghezza mast Stroke of rotary head Corsa testa di...

Open the catalog to page 5

DIMENSIONS DIMENSIONI HYDRAULIC CRAWLER DRILL With special Kinematics Allestimento con articolazione speciale TRANSPORT DIMENSIONS DIMENSIONI DI TRASPORTO

Open the catalog to page 7

MAST MOVEMENTS MOVIMENTAZIONI MAST

Open the catalog to page 8

C5 XP

C5 XP

Catalog excerpts

All CASAGRANDE - Foundation Division catalogs and technical brochures