GALATEA - GALATEA N&D

Product catalog summary

Overview

This document provides technical specifications and details for various Galatea fabric system installations, including wall and ceiling mounting options. It covers finishes, dimensions, system types, and component characteristics.

1. Finishes (F = FINITURE / FINISHES / FINITIONS)

25: Anodized aluminum with stainless steel color (anodized aluminium steel colour / aluminium anodisé inox)
67: Bright aluminum finish (bright aluminium / aluminium poli)

2. System Types and Installation Modes

2.1 Wall Systems (Sistema a parete)

These systems are mounted on walls and include single and consecutive fabric installations.

Parameters:

L: System width in centimeters
lt: Width of a single fabric unit (fabric width per unit)
C: Fabric height in centimeters
A: Bracket’s projection (support projection)
H: Distance from the wall
Dx / Sx: Right (Destro) or Left (Sinistro) orientation

Dimension relationships: lt = L - 40 mm (single fabric width is system width minus 40 mm)
Wall consecutive system: lt = L - 75 mm (fabric width adjusted for consecutive installations)
Wall slalom double system: lt = (L / 2) + 5 mm (for two fabric panels in slalom configuration)

2.2 Ceiling Systems (Sistema a soffitto)

Ceiling-mounted fabric systems with similar parameters to wall systems.

Parameters: Same as wall systems (L, lt, C, Dx, Sx)
Dimension relationships: lt = L - 40 mm for single fabric width
Ceiling consecutive system: lt = L - 75 mm

3. Dimensions and Codes

The document lists various dimension sets and corresponding product codes for different system widths and fabric heights. Examples include:

System widths: 90 cm, 140 cm, 125 cm, 55 cm, 60 cm, 75 cm, 105 cm, etc.
Fabric heights: 20 cm, 35 cm, 45 cm, 60 cm, 64 cm, 100 cm, 213 cm, etc.
Product codes such as 823419 DX/SX, 823439 DX/SX, 12555, 7260, etc.

4. Orientation and Views

Dx (Destro): Right orientation
Sx (Sinistro): Left orientation
Vista frontale: Frontal view of the system

5. Key Notes and Recommendations

Fabric width per unit (lt) is always slightly less than the system width (L) to allow for fitting tolerances.
Different system configurations (single, consecutive, slalom double) require specific adjustments to fabric width.
Finishes must be selected according to aesthetic and functional requirements, with anodized aluminum and bright aluminum as standard options.
Bracket projection (A) and wall distance (H) are critical for proper installation and alignment.

Summary

This technical document defines the parameters, finishes, and installation types for Galatea fabric systems mounted on walls and ceilings. It provides clear dimensional relationships and product codes to ensure correct sizing and assembly. The finishes and orientations are standardized to facilitate consistent installation and aesthetic quality.

Catalog excerpts

F = FINITURE 25 alluminio anodizzato inox F = FINISHES anodized aluminium steel colour F = FINITIONS aluminium anodise inox 67 alluminio lucido bright aluminium aluminium poli Sistema a parete - Wall system - Systeme de face vista frontale - frontal view - vue de face = sporgenza supporto bracket's projection retour support = di stanza parete wall distance retour du mur = larghezza sistema (cm) system width (cm) largeur systeme (cm) = Destro - Right - Droit = Sinistro - Left - Gauche = larghezza singolo tessuto fabric width per unit largeur chaque toile = altezza tessuto (cm) fabric width (cm) hauteur de la toile (cm) Sistema continuo a parete - Wall consecutive system - Systeme continu de face \\ —n- u \\ W vista frontale - frontal view - vue de face = larghezza sistema (cm) system width (cm) largeur systeme (cm) = larghezza singolo tessuto fabric width per unit largeur chaque toile = altezza tessuto (cm) fabric width (cm) hauteur de la toile (cm)

Open the catalog to page 1

F = FINITURE 25 alluminio anodizzato inox 67 alluminio lucido F = FINISHES anodized aluminium steel colour bright aluminium F = FINITIONS aluminium anodise inox aluminium poli Sistema a parete slalom 2 teli - Wall slalom double system - Systeme de face slalom double vista frontale - frontal view - vue de face L = larghezza sistema (cm) system width (cm) largeur systeme (cm) Sx = Sinistro - Left - Gauche lt = larghezza singolo tessuto fabric width per unit largeur chaque toile C = altezza tessuto (cm) fabric width (cm) hauteur de la toile (cm)

Open the catalog to page 2

F = FINITURE F = FINISHES F = FINITIONS alluminio anodizzato inox anodized aluminium steel colour aluminium anodisé inox alluminio lucido bright aluminium aluminium poli Sistema a soffitto - Ceiling system - Système plafond L = larghezza sistema (cm) system width (cm) largeur système (cm) Dx = Destro - Right - Droit Sx = Sinistro - Left - Gauche lt = larghezza singolo tessuto fabric width per unit largeur chaque toile C = altezza tessuto (cm) fabric width (cm) hauteur de la toile (cm) vista frontale - frontal view - vue de face Sistema continuo a soffitto - Ceiling consecutive system - Système...

Open the catalog to page 3

F = FINITURE F = FINISHES F = FINITIONS alluminio anodizzato inox anodized aluminium steel colour aluminium anodisé inox alluminio lucido bright aluminium aluminium poli Sistema a parete - Wall system - Système de face 64 L = larghezza sistema (cm) system width (cm) largeur système (cm) Dx = Destro - Right - Droit Sx = Sinistro - Left - Gauche lt = larghezza singolo tessuto fabric width per unit largeur chaque toile C = altezza tessuto (cm) fabric width (cm) hauteur de la toile vista frontale - frontal view - vue de face Sistema continuo a parete - Wall consecutive system - Système continu de...

Open the catalog to page 4

F = FINITURE F = FINISHES F = FINITIONS alluminio anodizzato inox anodized aluminium steel colour aluminium anodisé inox alluminio lucido bright aluminium aluminium poli Sistema a parete slalom 2 teli - Wall slalom double system - Système de face slalom double 100 vista frontale - frontal view - vue de face L = larghezza sistema (cm) system width (cm) largeur système (cm) Sx = Sinistro - Left - Gauche lt = larghezza singolo tessuto fabric width per unit largeur chaque toile C = altezza tessuto (cm) fabric width (cm) hauteur de la toile

Open the catalog to page 5

F = FINITURE F = FINISHES F = FINITIONS alluminio anodizzato inox anodized aluminium steel colour aluminium anodisé inox alluminio lucido bright aluminium aluminium poli Sistema a soffitto - Ceiling system - Système plafond 105 vista frontale - frontal view - vue de face L = larghezza sistema (cm) system width (cm) largeur système (cm) Dx = Destro - Right - Droit Sx = Sinistro - Left - Gauche lt = larghezza singolo tessuto fabric width per unit largeur chaque toile C = altezza tessuto (cm) fabric width (cm) hauteur de la toile Sistema continuo a soffitto - Ceiling consecutive system - Système...

Open the catalog to page 6