33CS2PPRH-03, 33CS2PP2S-03 Edge® Pro Programmable Commercial Thermostat

Product catalog summary

Product Overview: Carrier's Edge® Pro commercial programmable thermostats are designed for efficient HVAC control with features such as a sleek design, simplified two-wire installation, and compatibility with various heating and cooling systems including air conditioning, heat pumps, and water source heat pumps. The thermostat offers 2-stage heat/2-stage cool with one stage auxiliary heat, humidity control, and is compatible with Hybrid Heat® dual fuel systems.

Key Features:

Proportional integral control for precise temperature management.
Compressor and auxiliary heat lockout for heat pumps.
Remote sensing and occupancy override capabilities.
Keypad lockout with passcode protection for security.
Programmable settings for 7-day, 5/2-day, or 1-day schedules with up to 4 periods per day.
UV light and filter service reminders, random start, and smart recovery features.
Dry contact for economizer control.

Specifications:

Dimensions: Single piece - 5.2 x 5.2 x 1.3 inches; Two-piece - Display: 5.2 x 5.2 x 0.9 inches, Control module: 5.2 x 5.2 x 1.0 inches.
Power: 24 VAC, 50/60 Hz, 3 VA, RC/RH compatible, no batteries required.
Environmental: Operating temperature for display module is 32 to 104°F, and for control module is -4 to 158°F. Storage temperature is -40 to 158°F. Humidity range is 0 to 95% RH, non-condensing.
Compliance: FCC Part 15, Subpart J compliant.

Accessories: Includes remote space sensor with occupancy override button, outdoor temperature sensor, and supply/return air sensor.

Catalog excerpts

33CS2PPRH-03, 33CS2PP2S-03 Edge® Pro Programmable Commercial Thermostat-1

Product Specification edge® Pro Programmable Commercial ThermostatPart Numbers 33CS2PPRH-03 and 33CS2PP2S-03 Carrier’s Edge® Pro commercial programmable thermostats offer: • sleek design with simplified two-wire installation • 2-stage heat/2-stage cool with one stage auxiliary heat (air conditioning, heat pump, and water source heat pump units) • humidity control capability (with 33CS2PPRH-03 thermostat only) integrates with Humidi-MiZer® dehumidification system • Hybrid Heat® dual fuel system compatible (33CS2PP2S-03) • proportional integral control of heating and cooling stages • compressor lockout in emergency heat mode for heat pumps • auxiliary heat lockout sensing for heat pumps (requires outdoor air sensor) • remote sensing and averaging with occupancy override • keypad lockout security with passcode protection • heating and cooling set points with up to 6 hours of occupancy override • 7-day, 5/2-day, or 1-day programmable or non-programmable •4 or 2 periods per day selectable • UV light and filter service reminder • random start, smart recovery • dry contact enables economizer control Features/Benefits Carrier’s flexible 7-day, 5/2-day, or 1-day commercial programmable thermostats offer quality and reliability. The wall-mounted, low-voltage thermostat maintains room temperature by controlling the operation of an HVAC (heating, cooling and ventilation) system. Separate heating and cooling set points and autochangeover capability allow occupied and unoccupied programming for energy savings.

Open the catalog to page 1

33CS2PPRH-03, 33CS2PP2S-03 Edge® Pro Programmable Commercial Thermostat-2

The thermostat allows up to 4 time/temperature settings to be programmed in 24-hour intervals with daylight savings adjustment. The thermostat stores schedules for 7 independent days and batteries are not required. In the event of power interruption, the internal memory stores comfort schedules for an unlimited time. The clock will continue to run for 24 hours. Expanded backlit display includes English/metric unit selection and features mode and equipment status, occupancy, time of day, and outdoor-air temperature. In hospitality mode, the display will show user set point in place of actual temperature. The...

Open the catalog to page 2