RESITRIX® RESIFLEX 3D Sealing Strip
2Pages

The 3D expansion joint sealing strip The 3D expansion joint sealing strip PROFESSIONAL CROSS-JOINT AND T-JOINT SEALING PROFESSIONAL CROSS-JOINT AND T-JOINT SEALING One particular feature in constructing movement joints for which RESIFLEX® SK has already proven itself is the sealing of cross- and T-joints. We have now been able to develop our own unique product for this challenging application: RESIFLEX® 3D. PRODUCT PROPERTIES The special thing about RESIFLEX® 3D is that it is completely non-reinforced and can thus easily absorb and compensate for the three-dimensional movements – primarily at the crossing point. In this, RESIFLEX® 3D mainly makes use of the extremely high-level expansion properties of the EPDM material (up to 500%). The 33 x 33 cm RESIFLEX® 3D piece (cut to size as required) returns to its resting state after loading. The material properties are retained. It moves in all directions and simultaneously guarantees a permanently reliable seal. RESITRIX® Product catalogue APPLICATIONS • ESIFLEX® 3D and RESIFLEX® SK R for the construction of expansion joints, particularly in the area of unused roof constructions and roofs that can be walked on, as well as components that touch the ground. • RESIFLEX® 3D supports RESIFLEX® SK in the construction of critical cross-joints and T-joints. STRUCTURE The non-reinforced waterproofing membrane consists of a layer of EPDM and a special adhesive layer. The surface is textured (structured). This familiar RESITRIX® surface allows the RESIFLEX® 3D to be welded to RESIFLEX® SK sealing material. The sealing material of RESIFLEX® SK is warmed using a hot-air gun and bonded to the RESIFLEX® 3D surface. The weld bead produced during bonding is used as a visual check. T- and cross-seams of expansion joints can be sealed using a combination of RESIFLEX® SK/3D. Three-dimensional movements at the cross-point can be abs

installation | use Fix RESIFLEX® 3D sealing (33 x 33 cm) centred over a T- or cross abutment. Then RESIFLEX® SK is welded on as usual using hot air. When handling our products, please follow the information on our EC safety data sheets and the safety information on our container labels. In particular, please observe the regulations of the Ordinance on Hazardous Substances and the regulations on accident prevention in the employer's trade association. (As at January 2016) DELIVERY UNIT Individual roll Both the information and the product descriptions contained in this publication have been...