Ready made detailing components FASTER SEALING USING PREFORMED PARTS There are special ready made punched parts for sealing round fitted parts and for constructing any corners. The cut pieces are punched from the RESIFLEX® SK self adhesive expansion-joint sealing strip. CUT PIECES • Closed circle for inner corners BENEFITS • he notched punched parts do not have any reinforced T inlay within the expansion zones. There is therefore no need to manually destroy any inlay before installation. • hen correctly placed, the installation of flat cut piecW es lets you construct corner areas irrespective of their arrangement or angularity. • Notched circle for outer corners • It is possible to stretch the material, but a reduction in the material thickness of free-lying areas is avoided, unlike with plastic shaped parts. The material properties are thus fully maintained. • As in RESITRIX® waterproofing membrane, the emergence of an even welding bead on all cut pieces during hot-air welding guarantees visual reassurance of the 100% tightness of the seam. • Shaped parts do not have to be initially cut to size by hand; this makes working more efficient. • Tongue, oval, addition for inner and outer corners RESITRIX® Product catalogue READY MADE DETAILING COMPONENTS Ready made deta

INSTALLATION / FITTING CONDITIONS The cut pieces have a minimum width of 19 cm. Their edges have to be rounded off. In their original packaged condition, parts can be stored for 12 months. PRODUCT CODE Seam welding is possible down to -10 °C. The cut pieces and their installation within the entire corner construction are shown in the following illustrations. Additional supplementary cut pieces may be required if necessary. INNER CORNER OUTER CORNER Their full surface has to be welded using hot air. READY MADE DETAILING COMPONENTS READY-MADE PUNCHED PARTS Ready made detailing components CLOSED...