The effective vapour barrier membrane suitable for roof structure that are subjected to extreme stresses caused by the building structure ALUTRIX® 600 and ALUTRIX® FR are quick-application, self-adhesive and extremely resistant vapour barrier membranes. They consist of a reinforced aluminium material with a self-adhesive backing and a removable release film. Both vapour barriers are particularly well-suited to use on profiled steel sheet. PROPERTIES: PRODUCT-SPECIFIC PROPERTIES: •  LUTRIX® FR – comes with a reduced A fire load as per DIN 18234 and the Industrial Building Directive: •  an be walked on and stepped on C •  igher than average tensile strength H •  ormation of an airtight layer according F to energy saving regulations •  esistant to chemicals and ageing R •  LUTRIX® FR meets the FM Standard A Class No. 4470 •  LUTRIX® 600 complies with A the requirements for Class O Please refer to our product specification guidelines or ALUTRIX® installation instructions for detailed substrate requirements

* Ideally, a primer is not used within the roof area for loosely laid roof structures with mechanical fixation or ballasting. ** On dry, smooth and clean concrete materials only. Mechanical damage or perforations must be avoided. MATERIAL-RELATED INFORMATION TEST METHODS PACKAGING UNIT PER PALLET ROLL LENGTH ROLL WIDTH MAXIMUM TENSILE FORCE (LONGITUDINAL/TRANSVERSE) DIN EN 12311-2 NEEDLE TEAR RESISTANCE (LONGITUDINAL/TRANSVERSE) DIN EN 12310-1 COLD BENDING BEHAVIOUR WATERTIGHTNESS AT 4 BAR OVER 72 HOURS Tight SHEAR STRENGTH FIRE BEHAVIOUR FIRE CLASSIFICATION WATER VAPOUR PERMEABILITY SD VALUE...