*myarchiexpo

Carisa 4

Product catalog summary

BOREAS N Radiator Technical Data Summary

Installation Instructions

The radiator must not be installed upside down. The power cable and control modem are designed to be positioned on the underside of the unit. Incorrect installation orientation can cause product malfunction.

Warranty Conditions

If the radiator is installed upside down, resulting in damage or breakdown, such issues will not be covered under the warranty.

Dimensional Information

The radiator has a bore diameter of 93 mm and requires a minimum clearance of 100 mm for proper installation and operation.

Catalog excerpts

Key Component A Friction Cups/Cushions 4 B Left Bracket C Right Bracket D Screw-22x45mm E Wall Plug Accurately mark out bracket holes on wall using spirit level. Drill four 8mm diameter holes for left brackets (B) and four 8mm diameter holes for right brackets(C). Friction cups (A) MUST be fitted to each mounting brackets (B,C) to suppress potential noise. Screw brackets (B,C) into wall plugs (E) with 22mm x 45mm screws (D). Plang radiator by sliding the bosses on the back of the radiator into brackets (B/C). “ Attention! Radiator cannot be fitted upside down. The power cable and control modem...

Open the catalog to page 2