
The radiator must be installed with the power cable and control modem positioned at the bottom. Installing the radiator upside down is strictly prohibited.
Failure to install the radiator correctly (i.e., upside down) may cause product malfunction. Such damage will not be covered under warranty.
The radiator requires a minimum clearance of 100 mm, with a noted dimension of 111 mm (likely related to installation space or component size).
Accurately mark out bracket holes on wall using spirit level. Drill four 8mm diameter holes for left brackets (B) and four 8mm diameter holes for right brackets(C). Friction cups (A) MUST be fitted to each mounting brackets (B,C) to suppress potential noise. Screw brackets (B,C) into wall plugs (E) with 22mm x 45mm screws (D). Plang radiator by sliding the bosses on the back of the radiator into brackets (B/C). “ Attention! Radiator cannot be fitted upside down. The power cable and control modem are down side.Other-wise,product can has breakdown and will be considered out of warranty.”
Open the catalog to page 22 Pages
2 Pages
2 Pages
2 Pages
2 Pages
2 Pages
4 Pages
2 Pages
2 Pages
2 Pages
2 Pages
2 Pages
2 Pages
2 Pages
36 Pages
161 Pages
118 Pages
110 Pages
27 Pages
136 Pages
52 Pages
162 Pages
20 Pages
1 Page
1 Page
152 Pages
252 Pages
32 Pages
1 Page
38 Pages
288 Pages
128 Pages