
The radiator must not be installed upside down. The power cable and control modem are designed to be positioned at the bottom. Incorrect installation may cause product malfunction and will void the warranty.
The document references the BOREAS B model with dimensions or parameters labeled as W, H, and K, and specifies a minimum clearance of 100 mm, with a noted measurement of 111 mm. These details are critical for proper installation and operation.
Accurately mark out bracket holes on wall using spirit level. Drill four 8mm diameter holes for left brackets (B) and four 8mm diameter holes for right brackets(C). Friction cups (A) MUST be fitted to each mounting brackets (B,C) to suppress potential noise. Screw brackets (B,C) into wall plugs (E) with 22mm x 45mm screws (D). Plang radiator by sliding the bosses on the back of the radiator into brackets “ Attention! Radiator cannot be fitted upside down. The power cable and control modem are down side. Otherwise,product can has breakdown and will be considered out of
Open the catalog to page 12 Pages
2 Pages
2 Pages
2 Pages
2 Pages
2 Pages
4 Pages
2 Pages
2 Pages
2 Pages
2 Pages
2 Pages
2 Pages
2 Pages
36 Pages
161 Pages
118 Pages
110 Pages
27 Pages
136 Pages
52 Pages
162 Pages
20 Pages
1 Page
1 Page
152 Pages
252 Pages
32 Pages
1 Page
38 Pages
288 Pages
128 Pages