video corpo

ANGERS

ANGERS

ANGERS

Product catalog summary
Technical Specifications:
  • Dimensions: Width (W) + 90mm, Minimum clearance: 100mm, Depth: 55mm, Height: 84mm.
Components and Quantities:
  • Bleeding Valve Key (A): 1
  • Bleeding Valve 1/2" (B): 1
  • Blind Tap (C): 1
  • Friction Cups/Cushions (D): 2
  • Upper Bracket (E): 2
  • Lower Bracket (F): 2
  • Screw 5.5x45mm (G): 8
  • Wall Plug (H): 8
Assembly Instructions:
  1. Fit the bleeding valve (B) and blind tap (C).
  2. Use the Carisa bleeding valve key (A) to turn the bleeding valve (B).
  3. Accurately mark out bracket holes on the wall using a spirit level.
  4. Drill four 8mm diameter holes for upper brackets (E) and four 8mm diameter holes for bottom brackets (F).
  5. Friction cups (D) must be fitted to each mounting bracket (E, F) to suppress potential noise.
  6. Screw brackets (E, F) into wall plugs (H) with 5.5mm diameter x 45mm screws (G).
  7. Hang the radiator by sliding the bosses on the back of the radiator into brackets (E, F).
See more

Catalog excerpts

ANGERS-2

fitting instructionsKey Component Qty Bleeding Valve Key 1 Assembly Instructions Fit bleending valve (B) & blind tap (C). Use Carisa bleeding valve key (A) to turn bleeding valve (B). Accurately mark out bracket holes on wall using spirit level. Drill four 8mm diameter holes for upper brackets (E) and four 8mm diameter holes for bottom brackets(F). Friction cups (D) MUST be fitted to each mounting brackets (E,F) to suppress potential noise. Screw brackets (E,F) into wall plugs (H) with 5,5mm diameter x 45mm screws (G). Hang radiator by sliding the bosses on the back of the radiator into brackets...

 Open the catalog to page 2
ANGERS-3

TECHNICAL DATA ANGERS DOUBLE

 Open the catalog to page 3
ANGERS-4

Fit bleending valve (B) & blind tap (C). Use Carisa bleeding valve key (A) to turn bleeding valve (B). Accurately mark out bracket holes on wall using spirit level. Drill four 8mm diameter holes for upper brackets (E) and four 8mm diameter holes for bottom brackets(F). Friction cups (D) MUST be fitted to each mounting brackets (E,F) to suppress potential noise. Screw brackets (E,F) into wall plugs (H) with 5,5mm diameter x 45mm screws (G). Hang radiator by sliding the bosses on the back of the radiator into brackets (E,F).

 Open the catalog to page 4

All Carisa Designer Radiators catalogs and technical brochures

  1. OTTO

    2  Pages

  2. GLASGOW

    2  Pages

  3. MAYRA

    2  Pages

  4. SARP

    2  Pages

  5. BOREAS B

    2  Pages

  6. BOREAS M

    2  Pages

  7. BOREAS S

    2  Pages

  8. SOPHIA

    2  Pages

  9. ENTREE

    2  Pages

  10. JACOBS W

    2  Pages

  11. VESTA SINGLE

    2  Pages

  12. Unico_Tech

    2  Pages

  13. MOTION

    2  Pages

  14. BOREAS N

    2  Pages

  15. Carisa Lighting

    27  Pages

Archived catalogs

  1. Convectors

    52  Pages

  2. Carisa ISH 2019

    20  Pages

  3. FORTE

    1  Page

  4. ATLAS

    1  Page

  5. Catalog 2021

    152  Pages

  6. SOLEIL

    1  Page

  7. Catalog 2023

    128  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.
About ArchiExpo
ArchiExpo is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. ArchiExpo is an entity of VirtualExpo Group.