mc :+30U400015

Product catalog summary

Overview: The document describes the mc air/water atomizing humidifier, highlighting its advanced features and applications. It is designed for efficient humidification with low maintenance and high adaptability.

Features:

Constructed entirely from stainless steel, ensuring durability and compatibility with both demineralized and standard water.
Produces droplets of 10 microns or less, minimizing wetting.
Contains only one moving part, reducing maintenance needs.
Equipped with a self-cleaning needle for continuous operation.
Pre-built stainless steel AHU/duct manifolds available.
Low air consumption at 0.15 cfm per lb/hr.
Operates at a water pressure of 5 psi.
Supports multiple communication protocols including Modbus, BACnet, and WebGate.

Applications: Suitable for various environments such as printing, woodworking, textiles, clean rooms, museums, libraries, cold storage, manufacturing, warehouses, and hospitals.

Technical Specifications:

Atomizing head capabilities range from 6 to 15 lbs/hr (2.7 to 6.8 kg/hr).
Control cabinet capacities of 100 and 500 lbs/hr (45 and 227 kg/hr).
Control cabinet constructed from 16 gauge powder-coated steel, rated NEMA 1 with optional NEMA 4, NEMA 4X, and explosion-proof pneumatic options.
Communication via RS422 serial ports and various gateways.
Power supply requirements are 115/1/60 Vac, 75VA.
Operating conditions range from 34° to 140°F (1° to 60°C), with storage conditions from -4° to 160°F (-20° to 71°C).
Air pressure requirements are 50-100 psi entering and 30-55 psi leaving.
Water pressure requirements are 15-100 psi entering and 2-10 psi leaving.

Model Selection:

MC C R R 000 00: Cabinet type with options for room on/off, master/slave configurations, and NEMA ratings.
MC H M 000 000: Head type with options for manifold or single/double head room assembly, supporting various lbs/hr capacities.

Catalog excerpts

Air/Water Atomizing Humidier The mc represents the state of the art in air/water atomizing humidcation systems. The atomizing heads are constructed of all stainless steel, ready for demineralized or standard water, and have an integral cleaning pin and shut-off seat for no drip, low maintenance operation. The mc produces a phenomenal 100:1 modulating turn down! FEATURES: • 100% Stainless Steel Head Construction • 10 Micron or Less Droplet Size • Atomizing Head has 1 Moving Part - Extremely Low Maintenance • Self-Cleaning Needle for Continuous Operation • Pre-Built Stainless Steel AHU/Duct Manifolds • The Only Non-Wetting Room Atomizing System • Low Air Consumption (0.15 cfm per lb/hr) • Operates at 5 psi Water Pressure • Multiple Communication Capabilities (Modbus, BACnet, WebGate, etc.) APPLICATIONS: • Printing, Woodworking, Textiles (Room or AHU) • Clean Rooms (AHU) • Museums, Libraries (AHU) • Cold Storage (Room) • Manufacturing, Warehouse (Room or AHU) • Hospitals (AHU)

Open the catalog to page 1

Technical specications: Atomizing head capabilites Atomizing head construction Stainless steel parts,Viton o-rings Control cabinet capacities Control cabinet construction 16 gauge powder coated steel Control cabinet rating NEMA 1 (optional NEMA 4, NEMA 4X, Explosion Proof pneumatic) RS422 serial ports, CAREL protocol, Gateways for Modbus, BACnet, Echelon, TCP/IP Power supply Operating conditions Storage conditions Control cabinet input signals 0-1 Vdc, 0-10 Vdc, 4-20 mAdc Stand-alone system includes CAREL sensors for control, high limit, and air ow switch 50-100 psi (Minimum 3.4 bar to maximum...

Open the catalog to page 2

All Carel USA catalogs and technical brochures

Archived catalogs

HumiFog
2 Pages
GasSteam
2 Pages
HeaterSteam
2 Pages
CompactSteam
2 Pages
HumiSteam
2 Pages