PRODUCT DATA SHEET High performance masonry paint PERFORMANCE DATA Waterborne paint, water-impermeable and moderately breathable, easy to apply, ideal for professional use as it is extremely compatible and has excellent adhesion properties, filling and covering powers on a wide variety of substrates. Its excellent quality with good finishing properties and the hydropliolite base ensure maximum protection and resistance of external colour and excellent adhesion, thus making it suitable for application without any primer. Thanks to the quartz powder it contains, it has the power to fill the substrate, obtaining a compact and even finish. Its high opacity guarantees superb masking of any imperfections in the plaster and so the product, in the colours with refractive index >25, is also suitable for the painting and maintenance of exterior insulation coverings. Class EN13300 2 (5m2/l) Gloss level Very Matt Dirt retention Opacity level (Contrast ratio) Wet scrub resistance Specific weight Drying time Solid by weight SHELF LIFE 1 year minimum, stored in its unopened original can at temperatures between +5°C and +30°C. COLOUR RANGE White AC16 The range of colours can be extended using the Tucano, Area 115, Spazio 100 sample books. The colour could vary slightly from one production batch to the next; it is therefore important to finish the job with the same batch. It is ideal for decorating and protecting, from atmospheric agents, new structures or structures undergoing maintenance and that have alkaline substrates such as plasters with different compositions (cement, common lime, pre-mixed, skim coat plaster for exterior insulation), concrete and fibrocement, in rural, marine or industrial environments. Strong colours may also be used. While being compatible with cement and reinforced concrete, it guarantees good but not specific protection. On exterior surfaces subject to biological pollutants, such as mould, seaweed and moss, add 350 ml of B25 for every 14 litres of paint. Roller, Brush. Roller, Brush: 15-25% by volume with water.

PRODUCT DATASHEET High performance masonry paint ITALIAN PAINTS SINCE I COATING SYSTEM New substrates made of cement-based and gauged mortar plasters, reinforced concrete, prefabricated concrete structures 1.1 Power wash to remove any impurities such as dirt, moss, mould and parts flaking off the casting, and proceed as follows: 1.2 Apply three coats of Unikocap, 5-8 hours apart, to a dry surface. 2.1 Using brushes and scrapers, remove any paint that is flaking off, bloom or other uneven residues or crumbling materials and power wash with a high pressure 2.2 Restore any missing plaster using...