DATA SHEET RIPLAST 1 SATIN Paint for synthetic wood PERFORMANCE DATA This product is suitable for coating wood artefacts for both interior and exterior environments, it is waterproof, easy to apply, and ideal for professional use as it has high compatibility and high coverage and adhesion characteristics on different types of impregnating substances. It ensures a finish with excellent uniformity and formidable mechanical strength and resistance to weathering; these are indispensable elements for the duration of the application, which is useful for protecting the artefact over time. Its high quality allows us to achieve the best aesthetic and technical solution for the various painting requirements permitting a high level of finishing with maximum protection and durability for exterior environments even in situations of high exposure to harsh conditions. The characteristics of adequate elasticity, resistance to scratching and wear resistance create a film that is stable, attractive as well as resistant to stresses due to variation in size of the surfaces and due to changing climatic conditions. It is formulated with modified alkyd synthetic resins, in solvent phase, which guarantees high protection for exterior environments that are exposed to weathering and sunlight, and has a glossy finish. The matt finish should be used for exterior environments only as a finishing layer. Its good distribution and low tendency to dripping permit an easy application with manual or mechanical tools that allow a finish characterized by excellent visual consistency, uniform thickness and adequate coverage of edges in both professional and "do it yourself" applications. EXCELLENT GOOD 50-70 s 20-30 875–975 g/l recoatable 24h; fully 24h Drying time Value EXCELLENT Gloss level Specific weight Resistance to weathering Resistance to abrasion Resistance to UV rays Elasticity Viscosity SHELF LIFE 1 year minimum, stored in its unopened original can at temperatures between +5°C and +30°C. COLOUR RANGE It is suitable for decoration and protection from atmospheric agents of new artifacts or artifacts undergoing maintenance based on wooden substrates of different species, in rural, marine or industrial environments, such as fences, balcony railings wood paneling, wooden flower boxes, gazebo, trusses and frames. To ensure a good resistance in time it is essential that the wooden artifact is free from resin and oils, well dry and with a humidity of 15% -18% and the surface should be sandblasted. The article must also be constructed with rounded edges and appropriate gradients to avoid stagnation of water. For spray applications, care must be taken regarding the total thickness of the layers applied in order to prevent long drying times and wrinkling. High film thickness per layer and unfavorable environmental conditions slow down in depth drying and hardening of the product. Make sure that the previous layer is fully

Paint for synthetic wood dried before overcoating. Ovecoating should be carried out within 72 hours to ensure a good adhesion of subsequent layers, otherwise sandblast between layers. In cases in which the product has been stored at low temperatures it is advisable to bring up the temperature to at least +1 5 ° C before application. Tools should be cleaned with Acquaragia VD 1 00 (turpentine) immediately after use. Sanding dust and / or sprinkling and dry paint residues should not be accumulated because they could cause spontaneous combustion. Brush roller, spray Up to 8% by volume with Acquaragia...