video corpo

RIPLAST 1 LUCIDO
2Pages

{{requestButtons}}

Catalog excerpts

RIPLAST 1 LUCIDO - 1

Flatting glossy This product is suitable for coating wood artefacts for both interior and exterior environments, it is waterproof, easy to apply, and ideal for professional use as it has high compatibility and high coverage and adhesion characteristics on different types of impregnating substances. It ensures a finish with excellent uniformity and formidable mechanical strength and resistance to weathering; these are indispensable elements for the duration of the application, which is useful for protecting the artefact over time. Its high quality allows us to achieve the best aesthetic and technical solution for the various painting requirements permitting a high level of finishing with maximum protection and durability for exterior environments even in situations of high exposure The characteristics of adequate elasticity, resistance to scratching and wear resistance create a film that is stable, attractive as well as resistant to stresses due to variation in size of the surfaces and due to changing climatic conditions. It is formulated with modified alkyd synthetic resins, in solvent phase, which guarantees high protection for exterior environments that are exposed to weathering and sunlight, and has a glossy finish. The matt finish should be used for exterior environments only as a finishing layer. Its good distribution and low tendency to dripping permit an easy application with manual or mechanical tools that allow a finish characterized by excellent visual consistency, uniform thickness and adequate coverage of edges in both professional and "do it yourself" applications. Gloss level Specific weight Drying time SHELF LIFE 1 year minimum, stored in its unopened original can at temperatures between +5°C COLOUR RANGE Colourless TYPICAL USE 's suitable for decoration and protection from atmospheric agents of new artefacts or artefacts undergoing maintenance based on wooden substrates of different species, in rural, marine or industrial environments, such as fences, balcony railings wood panelling, wooden flower boxes, gazebo, trusses and frames. To ensure a good resistance in time it is essential that the wooden artefact is free from resin and oils, well dry and with a humidity of 1 5% -1 8% and the surface should be sandblasted. The article must also be constructed with rounded edges and appropriate gradients to avoid stagnation of water. For spray applications, care must be taken regarding the total thickness of the layers applied in order to prevent long drying times and wrinkling. High film thickness per layer and unfavourable environmental conditions slow down Azienda con Sistema Certificate UNI EN ISO 9001

Open the catalog to page 1
RIPLAST 1 LUCIDO - 2

Flatting glossy in depth drying and hardening of the product. Make sure that the previous layer is fully dried before overcoating. Ovecoating should be carried out within 72 hours to ensure a good adhesion of subsequent layers, otherwise sandblast between layers. In cases in which the product has been stored at low temperatures it is advisable to bring up the temperature to at least +1 5 ° C before application. Tools should be cleaned with r Acquaragia VD 100 (turpentine) immediately after use. Sanding dust and / or sprinkling and dry paint residues should not be accumulated because they...

Open the catalog to page 2

All CAP ARREGHINI catalogs and technical brochures

  1. CAPWHITE

    2 Pages

  2. UNIKOCAP

    2 Pages