Standard GFRP monobloc upstands Standard GFRP monobloc upstands are realized with glass fibre-reinforced polyester, white pigmented on the internal side. They are insulated with rigid expanded polyurethane panels, density 35±1 kg/m3. Thanks to their easy and quick installation and because of the great light diffusion given by the shape, prefabricated upstands are particularly suitable as an alternative to traditional concrete support walls, which are expensive and difficult to realize, especially if circular. They are impact resistant, weather resistant, dimensionally stable and designed to collect any condensation water. They are available in the dimensions and heights shown in the tables alongside. GFRP monobloc upstands with extractors Similar to the standard GFRP ones, this kind of upstands can be made in the dimensions shown in the tables alongside, with a height of 50 cm. GFRP monobloc upstands with extractors are particularly suitable for spaces where continuous ventilation, both natural or powered, is required in order to get an air exchange without the use of traditional openings. The extractor is tangential, with a 240 m3/h flow rate and a shielded single-phase motor (230 V, 37 W) able to operate with temperatures from -30°C to +50°C. The air flow is protected by an anti-insect net. Every upstand can fit to our domes and opening device systems in order to get an excellent natural illumination, a great daily ventilation system and/or a smoke and heat exhaust ventilation system. See also: / Natural zenithal illumination / Smoke and fire exhausting systems / Accessories CAODURO® S.p.A. Via Chiuppese, 15, 36010, Cavazzale (VI), Italy Phone +39 0444 945959 - Fax +39 0444 945164 [email protected] - www.caoduro.i

Circular monobloc upstands Rectangular monobloc upstands Square monobloc upstands Every upstand can fit to our domes and opening device systems in order to get an excellent natural illumination,