1. Catalogs
  2. CAODURO
  3. SMOKE OUT SHED™, for walls

SMOKE OUT SHED™, for walls

SMOKE OUT SHED™, for walls

Product catalog summary
Introduction
The document discusses the application and specifications of the SMOKE OUT VERT™ natural smoke and heat exhaust ventilators (NSHEVs) for walls, manufactured by CAODURO® S.p.A. These devices are crucial for smoke and heat exhaust ventilation in buildings, especially in the event of a fire.

Specifications
The SMOKE OUT VERT™ complies with Regulation (EU) No 305/2011 and is CE marked. It is tested and certified according to EN 12101-2 Standard. The device features a natural anodized aluminium vertical frame, available with or without a thermal break, and can hold polycarbonate or glass sheets. The frame opens with a single leaf and includes hinges, gaskets, and fastening hardware.

Operational Features
The ventilator includes an awning window opening device with a pneumatic actuating cylinder and a decelerator for controlled opening. It is equipped with a non-thermosensitive actuator device, unless specified otherwise. Inspection and maintenance are performed externally. The device can optionally open for daily ventilation using an electric motor or compressed air.

Performance and Reliability
The ventilator is designed to withstand wind loads (WL 1500) and maintain operational reliability (Re 300*). It is resistant to low ambient temperatures (T(00)) and heat (B300). The materials used are rated Euroclass B s1 d0 for polycarbonate sheets and Euroclass A1 for glass sheets.

Dimensions and Customization
The aerodynamic free area Aa value can be requested from the company. The frame dimensions range from a minimum of 60x60 cm to a maximum of 160x250 cm, with variations for frames with or without thermal breaks.

Conclusion
The SMOKE OUT VERT™ is a robust and reliable solution for smoke and heat exhaust in building walls, designed to operate effectively under various weather conditions and comply with stringent safety standards.
See more

Catalog excerpts

SMOKE OUT SHED™, for walls-1

SMOKE OUT VERT™, for walls The application of natural smoke and heat exhaust ventilators for walls and saw-tooth roofs deserves a more in-depth analysis. The NSHEVs installed on buildings walls could be in fact exposed to overpressures due to wind effects, or could be directly hit by headwinds, thus rejecting smoke inside the building itself. Therefore, only a careful evaluation of the designer allows to predict the real NSHEVS operating conditions, by assessing the presence of causes which can negatively influence smoke and heat exhaust ventilation in the event of fire, with any external weather condition. The SMOKE OUT VERT™ natural smoke and heat exhaust ventilators for walls, manufactured by CAODU-RO®, comply with Regulation (EU) No 305/2011. They are provided with CE marking, tested and certified according to EN 12101-2 Standard by a notified body with the aerodynamic free area evaluated in absence of wind conditions. The device is made up of a natural anodized aluminium vertical frame (with or without thermal break), built with extruded profiles. Aluminium span-in glazing bead are suitable for holding alveolar polycarbonate sheets in opal or transparent colours or glass sheets. *10,000 cycles dual purpose Frame clear span A The frame can be opened with a single leaf with a central cross-piece, complete with hinges, gaskets and fastening hardware. Awning window opening device is made up of a support bracket anchored to the frame, a double effect pneumatic actuating cylinder and a decelerator with brake function to slow down the opening. Moreover, it is equipped with an actuator device with non-thermosensitive element as required by standards, unless otherwise specified. Inspection and maintenance take place by opening the device from the outside. There are two sealing points for fastening against possible accidental openings, which ensure frame stability in presence of extreme weather conditions. Opening for daily ventilation by means of electric motor or compressed air is an optional. See also: / Ventilation systems / Smoke and fire curtains / Boxes / Accessories CAODURO® S.p.A. Via Chiuppese, 15, 36010, Cavazzale (VI), Italy Phone +39 0444 945959 - Fax +39 0444 945164 [email protected] - www.caoduro.it

 Open the catalog to page 1
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.