*10,000 cycles dual purpose SMOKE LAME™ PT, for walls SMOKE LAME™ PT complies with Regulation (EU) No 305/2011. It is provided with CE marking, tested and certified according to EN 12101-2 Standard. The structure is composed by a perimeter frame and extruded aluminium louvre holder profiles, complete with EPDM gaskets. The louvres can contain alveolar polycarbonate sheets UV rays protected, in clear transparent or opal white colours, or alveolar polycarbonate sheets coupled with aluminium external ones thus obtaining blank louvres. SMOKE LAME™ PT is provided with side spoilers for saw-tooth roof applications. Side spoilers are available upon request for wall applications. The opening device can be electric with 24V DC low voltage motors suitable for direct connection for opening by automatic/manual control in case of fire. Otherwise, the opening device can be pneumatic, with low gas consumption, complete with an actuator. This one is equipped with non-thermosensitive element as required by standards, unless otherwise specified, which is provided with a suitable CO2 cylinder. The latter operates the pneumatic cylinder to allow the louvers opening. A release system allows opening for inspection and for maintenance from the outside. Louver height H: 20 cm Minimum custom made dimensions Clear span (LxH): L 55 cm, H 80 cm (4 louvers) Wall opening (D): L+16 x H+6 cm Maximum custom made dimensions Clear span (LxH): 160x240 / 240x160 cm (12 louvers) Wall opening (D): L+16 x H+6 cm See also: / Ventilation systems / Smoke and fire curtains / Boxes / Accessories CAODURO® S.p.A. Via Chiuppese, 15, 36010, Cavazzale (VI), Italy Phone +39 0444 945959 - Fax +39 0444 945164 [email protected] - www.caoduro.it