VORTEX PERSONAL CONTROL SWIRL DIFFUSER 80 CFM/100 CFM The Camino swirl floor diffusers are designed for use in raised access floor air distribution systems, where the floor cavity is used as a pressurized supply air plenum. The low velocity swirl discharge pattern produces high room air induction rates and superior occupant comfort. The air flow regulator can be adjusted easily by hand for your own personal comfort conditions. Dust/dirt collection basket catches anything that might fall through the face of the diffuser and is easily removable for cleaning. . An architecturally appealing face design compliments any contemporary decor and is available in black, cool gray and warm gray stock colors. Custom colors available upon request subject to minimum quantity ordering. Allowing extreme flexibility in space planning, the diffuser, once installed in the access floor panel, can be quickly relocated with modular plug and play wiring to accommodate changing conditions and floor layouts. CAMINO CLO OPEN controls allows for easy operation for more or less cooling. No tools needed. SE NEW Integral slider M O D U L A R 89 CARLINGVIEW DRIVE, TORONTO, ON M9W 5E4 S Y S T E M S I N C . TEL (416) 675-2400 FAX (416) 675-2424

- 80 CFM or 100 CFM. Internal locking set screw allows for factory setting of maximum CFM. Typical design is 80 CFM for interior zone work stations and 100 CFM for perimeter zones and meeting rooms. - Constructed of High Strength Polymer which complies with UL2043. - 8" nominal round diffuser. - Air leakage control gasket seal. - Dust/dirt basket catches anything that might fall through the diffuser face. - Easily removable for cleaning. - Air flow is easily adjustable with slider control and open/closed indicator. - Standard finish is gray or black core and trim ring. PERFORMANCE DATA Automatic...