POWER SUPPLY MODULE The Camino Class 2 power supply module (PSM) provides low voltage power for thermostatically controlled floor VAV diffusers. • 120 volt power provided by Div. 16. Output of PSM is 24 V.A.C. -100 VA • Optional modular 120 volt power input connector cables and 120 volt plug and play armoured flex cables allow for faster installation and cost effective flexibility for future changes. • Low voltage daisy chain cables, thermostats, thermostat cabling and connection to Building Automation System provided by Controls Contractor. • PSM accepts a 0-10 VDC signal from control system to operate diffusers. CAMINO MODULAR SYSTEMS INC.

PSC100AB10 Enclosed Single 100 VA Power Supply, 120 to 24 Vac. Transformer: One 100 VA Split-Bobbin, Circuit Breaker Secondary: 24 Vac, w/LED Indicator 24 Vac ON/OFF: On/Off Switch Main Breaker ON/OFF: Switch / Breaker (10 Amp) (Kills power to entire unit: Outlets, Aux. Output & Transformer)** Total Combined Output 9A Mounting: Mounting plate included (as shown) Approvals: Class 2 UL Listed, UL916, UL508, C-UL, CE, RoHS - *Move internal jumper to "HOT" position if you wish outlets to always be hot otherwise outlets will be switched by main breaker. - To order without enclosure, see PSB100AB10....