360 CFM Perimeter Heat and Cool Module

Product catalog summary

Overview: The document provides technical specifications and performance data for the 360 CFM Perimeter Heat and Cool Module by Camino Modular Systems Inc., located in Toronto, Ontario.

Specifications:

The module includes integral motorized dampers providing 360 CFM for a 10ft. module at 0.050 w.g.
Damper frequency can be adjusted for low solar load zones.
Modular connectors facilitate easy daisy chain connections for actuators, power supply, and thermostat.
The power supply module is pre-wired in a separate enclosure for control wiring and BAS interface.
Variable air volume control is enabled by a 0 to 10V DC output.
A hot water fin tube system is available in single or two-row configurations.
Control valves and associated piping for the fin tube are not included.
Control wiring and low voltage daisy chain wiring are not included.
120 V feed to the power supply module is not included.
A continuous linear aluminum grille is available in anodized or painted finishes to match curtain wall mullions.

Performance Data:

Air Distribution: The module's air distribution performance varies with plenum pressure, with maximum CFM ranging from 310 to 475 and maximum NC from 31 to 35, depending on the pressure (0.025” to 0.10” w.g.).
Fin Tube Element: The fin tube element performance data includes various models with different tube sizes, materials, and fin configurations. The BTU/hr./ft. ratings are provided for different temperatures ranging from 150°F to 220°F.

Recommendations:

Ensure compatibility of control valves and piping with the existing system.
Consider the specific requirements for control wiring and power supply connections.
Choose the appropriate grille finish to match the building's aesthetic requirements.

Catalog excerpts

360 CFM Perimeter Heat and Cool Module-1

360 CFM PERIMETER HEAT AND COOL MODULE CURTAIN WALL ALUMINIUM GRILL CURTAIN WALL ALUMINIUM GRILL ACCESS FLOOR SEALED / CAULKING UNDER FLOOR TO ELIMINATE PRESSURIZED PLENUM HEATING MOPE- SECTION A-A SEALED / CAULKING UNDER FLOOR TO ELIMINATE PRESSURIZED PLENUM COOLING MOPE- SECTION A-A TITLE: PASSIVE HEAT/COOL MODULE _ CAMINO MODULAR SYSTEMS INC

Open the catalog to page 1

360 CFM Perimeter Heat and Cool Module-2

- Integral motorized dampers provide 360 CFM for a 10ft. module @ .050 w.g. - Damper frequency can be reduced for low solar load zones. - Modular connectors allow for easy daisy chain connection of actuators to power supply and thermostat. - Power Supply Module is pre-wired in separate enclosure to accommodate control wiring and interface with BAS. - 0 to 10V. DC output allows for control signal to provide variable air volume. - Hot water fin tube system available in single row or two row. - Control valves and associated piping for fin tube by others. - Control wiring and low voltage daisy chain...

Open the catalog to page 2

All CAMINO Modular Systems Inc catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list