BFDE
2Pages

PRODUCT SHEET Fixed Bollards for Energy Supply (BFDE) Simple and Double Versions – Power Supply Simple Version Double Version 1 high pedestal Energy supply 1 body module appliances (with 1 cap protections) 1 door 1 2-point lock 1 stainless steel key Energy supply 1 high pedestal appliances (with 2 body modules protections) 1 cap 2 doors 2 2-point locks 1 stainless steel key DESCRIPTION The fixed bollard for power supply has been designed to make multiple voltage connections easily depending on setup. 3 socket types available for low voltage: 16 Amp (2 Poles+Earth), 32 Amp (3 Phases+Neutral+Earth) and 63 Amp (3 Phases+Neutral+Earth). Each socket is protected by its own 30 mA differential breaker, gauged according to socket. The great resistance of the fixed unit for power supply allows durable exposure in public areas. The fixed bollards for power supply are designed and built with the greatest care, according to strict quality and safety specifications. Two models are available as fixed units: - BFDE, simple: up to 6 x 16A socket connections. - BFDE, double: up to 12 x 16A socket connections. See our catalogue for the various possibilities. 1- BFDE, simple with 6 x 16A sockets 2- BFDE, double with 6 x 16A sockets and meter, 3- 16A 30mA differential breaker 4- Sockets 16Amp 2Poles+Earth with spring loaded protection flap, 5- Power supply panel, pre-wired. The fixed bollard for power supply is meant to be installed by fastening mason screws in a concrete slab. SURFACE FINISH As a standard: Dry Protector primer for better adherence of the finish coating on aluminium. Thermosetting polyester powder coating, matt finish. Standard colour: RAL 7016 (Charcoal grey) OPTIONS & ACCESSORIES - Colours: other RAL shades available on request Z.A. du Couquiou – 84320 ENTRAIGUES – France Tel: +33 490 480 808 – Fax: +33 490 480 088 E-mail: urbaco@urbaco.fr www.urbaco.fr DESCRIPTON: power supply panel Inside the fixed bollard for power supply: HYPRA IP44 (EU standard) sockets. Each socket has its own 30 mA differential breaker for the protection of users. All components are mounted inside a plastic box. Breakers are protected behind a transparent cover. The panel is pre-wired with 6 metres of cable for connection to the mains network. The double version is available with an electricity meter: the upper part integrates the panel (as shown in ‘5’); the lower part is equipped with an aluminium plate designed for the installation of your local electricity board panel (not delivered). Intellectual Property of URBACO – Not to copy – Specifications are not contractual – Changes likely to be made without any notice – Most of the models shown are registered – April 2006

PRODUCT SHEET Fixed Bollard for Energy Supply (BFDE) Single & Double Version – Power and/or Water Supply Single Version Double Version Charcoal Grey Gris anthracite Inner Components Water supply 1 x high pedestal 2 x trunks 1 x cap 2 x service doors 2 x 2-point locks 1 x stainless key Inner Components Water supply and / or Power supply (with protections) 1- BFDE, single module with 4 valves, 2- BFDE, double module with Fixed Bollards for Energy Supply are designed to make multiple power and 6 x 16Amp sockets and 4 x / or water connections depending easily in 16, 32 or 63 Amps. valves. - For...