Automatic retractable bollards ONE50EVO
2Pages

product sheet Automatic retractable bollards ONE50EVO High security - Built-in hydraulics unit Certification IWA 14-1:2013 Bollard V/7200[N3C]/80/90:4.2* Certification PAS68:2013 Bollard V/7500[N3]/80/90:3.9/22.7* ONE50EVO A single ONE50EVO high-security bollard withstands consecutive impacts from two trucks driving at 80 km/h. After impact, the bollard remains operational and continues to ensure security of the access point. The ONE50EVO high-security bollard is designed to control the access to sensitive installations and protects them from terrorist attacks. Power drive The hydraulic unit is built-into the bollard casing. It requires no connection of flexible cables between the bollard and the hydraulic pump. Characteristics (standard version) Dimensions (mm): 0325 H1000 (above ground) Material: high-resistance steel Treatment: heat galvanized body (casing and bollard head) Cylinder: simple-effect, hydraulic Oil: biodegradable Standard operating temperature: from 0 to 50 °C Extracting time: from 5 to 7 seconds Retracting time: 5 seconds Protection rating: IP67 (sealed against dust and protected from any immersion effects) Power supply: 400V three-phase Total weight: 1.100 kg CRASH-TEST 2015 Consecutive crash-tests by two trucks on the same ONE50EvO bollard according to standards IWA 14-1:2013 and PAS68:2013 Urbaco is the first manufacturer in the world to have tested two consecutive crash tests on the same bollard (with one N3C and one N2A type trucks) according to the latest international standards (IWA 14-1:2013 et PAS68:20l3). The crash-tests have proven the resilience and high-level of security of the ONE50EVO bollard, which remains operational even after various ramming attempts by trucks. Certification: IWA 14-1:2013 Bollard V/7200[N3C]/80/90:4.2* Energy of the impact: 1.776 kJ Report no. 1207615-003-01 available on request Certification: PAS68:2013 Bollard V/7500[N3]/80/90:3.9/22.7* Impact energy: 1.776 kJ Report no. 1207615-003A-01 available on request Certification: IWA14-1:2013 Bollard V/7200[N2A]/80/90:2.9* Impact energy:: 1.765 kJ Report no. 1207615-017-01 available on request Type of product (bollard) Type of test (vehicle) Weight of vehicle (kg) Type of vehicle Speed of impact (km/h) Angle of impact (°) Penetration of vehicle (m) 2010 Certification ASTM F-2656-07 - M50-P2* (impact energy: 1.609 kJ) This information is the intellectual property of URBACO - photocopying is prohibited - Specifications and images are non-binding - Changes are possible, without notice - The majority of the presented models have registered trademarks. URBACO S.A - S.A. with share capital of 1,500,000 € - Siret 33944567800032 R.C.S. AVIGNON 1999 B 40308 -TVA Intracom FR 06 339 445 678

PRODUCT SHEET Automatic retractable bollards ONE50EVO High security - Built-in hydraulics unit Bollard cladding The ONE50EVO bollard is equipped with an innovative interchangeable sleeve system that allows you to customise the appearance of the access points and repair damaged heads in under 5 minutes. 325 mm Painted sleeve Material: steel Treatment: anti-corrosion protection with high zinc-content powder primer RAL paint: matt, thermosetting, polyester powder (RAL3020 on the standard version) Stainless steel sleeve Material: 316L stainless steel Treatment: polishing and corrosion inhibited...