Catalogs >
CAME URBACO >
Automatic retractable bollards ONE30EVO

Automatic retractable bollards ONE30EVO
2Pages

Catalog excerpts

Automatic retractable bollards ONE30EVO - 1

product sheet Automatic retractable bollards ONE30EVO Certification IWA 14-1:2013 Bollard V/7200[N2A]/48/90:0,0* Certification PAS68:2013 Bollard V/7500[N2]/48/90:0,0/0,0* ONE30evo A single high-security ONE30EVO bollard can withstand the impact of a truck travelling at 48 km/h. After the impact, the bollard still ensures the security of the access point. The ONE30EVO high-security bollard is designed to control access to sensitive sites and protect strategic access points from terrorist attacks. Characteristics (standard version) Dimensions (mm): 0250 H1000 (above ground) Material: high-strength steel Treatment: hot-dip galvanising of structural parts (casing and head of the bollard) Cylinder: single-acting hydraulic Oil: biodegradable Standard operating temperature: 0 ... 50 °C Raising time: 5/7 seconds (1.5 seconds with the E.F.O. option) Lowering time: 3 ... 5 s (depending on the outside temperature) Protection rating: IP67 (protected against dust and the effect of immersion) Total weight: 610 kg THE CRASH TEST Crash-test of the ONE30EvO high-security bollard according to the IWA 14-1: 2013 and PAS68: 2013 standards. The crash test demonstrated the resistance and the high level of security of the ONE30EVO bollard, by stopping a ram vehicle. The vehicle was stopped with 0 meter of penetration after the obstacle, and no debris was projected. Certification: IWA 14-1:2013 Bollard V/7200[N2A]/48/90:0,0* Impact energy: 681,2kJ Report no. 1207615-009-B-01 available on request Certification: PAS68:2013 Bollard V/7500[N2]/48/90:0,0/0,0* Impact energy: 681,2kJ Report no.1207615-009-A-01 available on request Interpretation of the standard IWA 14-1:2013: Bollard V / 7200 [N2A] / 48 / 90 : 0,0 - i Jf-' ‘“I ' ll 1 „ Type of product (bollard) Type of test (vehicle) Weight of vehicle (kg) Type of vehicle Speed of impact (km/h) Angle of impact (°) Penetration of vehicle (m) This information is the intellectual property of URBACO - photocopying is prohibited - Specifications and images are non-binding - Changes are possible, without notice - The majority of the presented models have registered trademarks. URBACO S.A - S.A. with share capital of 1,500,000 € - Siret 33944567800032 R.C.S. AVIGNON 1999 B 40308 -TVA Intracom FR 06 339 445 678

Open the catalog to page 1

Automatic retractable bollards ONE30EVO - 2

PRODUCT SHEET Automatic retractable bollards ONE30EVO High-security - Separate hydraulic unit Bollard cladding The ONE30EVO bollard is equipped with an innovative interchangeable sleeve system that allows you to customise the appearance of the access points and repair damaged heads in under 5 minutes. Painted sleeve Material: steel Treatment: zinc-based primer as standard reinforcing corrosion-resistance RAL paint: Matt finish thermosetting polyester powder top coat (RAL3020 standard) Stainless steel sleeve Material: 316L Stainless Steel Treatment: polish and satin-finished Customized...

Open the catalog to page 2