PRODUCT SPECIFICATION 150 DASCOMB ROAD, ANDOVER, MA 01810 | 978.623.9980 | 800.225.1141 | Fax: 800.533.6788 www.californiapaints.com | [email protected] STAIN KILLING PRIMER 20701 Interior PRODUCT SPECIFICATIONS: Type: Alkyd Dispersion Exposure: Interior PRODUCT DESCRIPTION: Specular Gloss: This is an interior quick drying white primer-sealer that prevents the migration of bleeding stains that Volume Solids: show through other primers. This primer seals water stains on plaster, ceiling tile and sheetrock. Soot damage and smoke residue that remains after washing or solvent cleaning can be sealed with this product Dry Film Thickness: 1.2 mils Sheetrock, plaster, wallboard, interior wood trim, primed metal Thinner: Water WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD Soap & Water IS TOXIC. EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-ap- AVAILABLE COLORS AND BASES: proved respirator to control lead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protect yourself and your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on to www.epa.gov/lead. AVAILABLE PACKAGE SIZES: Quart Surfaces to be primed must be clean, dry and free of contaminants such as dust, dirt, oil, grease, wax, loose paint, rust and mill scale. Mildew must be killed by scrubbing with a solution of equal parts household bleach and water. Rinse with clean water and allow to dry. This product should be applied by brush, DRYING TIMES: roller or spray. This material is supplied at proper application consistency. Use water and soap for easy cleanup of paint tools and equipment. ARCHITECTURAL SPECIFICATIONS: Plaster, Wallboard, Sheetrock, Primed Metal, Wood, Aluminum: 1 Coat Stain Killing Primer 20701 SURFACE SPREAD RATE: 1 or 2 coats California Latex finish (Spray Application is 50% of above) This is not a vapor barrier and therefore is not suitable for use under wallpaper. Air and surface temperature should be 50ºF (10ºC) or more during application and drying times. Do not use when rain is imminent or on humid or foggy days. Do not tint with Universal Colorants. Brush : Synthetic, Nylon or Polyester Roller : 3/8” Nap Synthetic Fiber SAFETY INFORMATION: CAUTION! Keep out of reach of children. Do not take internally. Close container after each use. FIRST AID: If swallowed, do not induce vomiting. Call physician immediately.