*myarchiexpo

PB-01

Product catalog summary

Components: The PB-01 consists of two parts: the PB Top and PB Base.

Characteristics: The top has a diameter of 170 mm and an area of 227 cm², while the base has a diameter of 197 mm and an area of 305 cm². The total weight is 232 grams. The height is adjustable from 28 to 42 mm, and with the U-PH5 slope corrector, it can be adjusted from 42 to 56 mm with a slope adjustment from 0 to 5%.

Material: Made from copolymer polypropylene (CPP), composed of approximately 80% first-grade pre-selected recycled PPC and 20% talc and black masterbatch. It is designed and manufactured in Europe using recycled materials exclusively from the EU. The material is resistant to weathering, sea salts, algae, and various chemicals, with a temperature range of -30°C to +80°C.

Packaging: Each carton contains 24 pieces, weighing 6.07 kg, with dimensions of 600 x 400 x 120 mm. A pallet holds 80 cartons, totaling 1920 pieces, with pallet dimensions of 100 x 120 x 221 cm.

Applications: Buzon pedestals are suitable for outdoor applications such as terraces, pool decks, and rooftops. They can support various finishing materials like granite stone pavers, composite decking, and ceramic tiles. They are compatible with solid substrates like concrete slabs and waterproof membranes.

Compression Test: Tests were conducted on full, half, and quarter surfaces of the head. The yield strength and breaking load were measured in kN and lbF, with the highest breaking load at 9.74 kN (2189 lbF) for the full surface.

Safety Instructions: Buzon pedestals are designed for pedestrian traffic only and should not support moving or vibrating machinery. Continuous improvements may lead to specification changes without notice.

Catalog excerpts

Technical Data Sheet-PB PB-01 Adjustable from 28 to 42 mm COMPONENTS The PB-01 is composed of 2 pieces ( PB Top + PB base ) CHARACTERISTICS Top : ø 170 mm, 227 cm² Base : ø 197 mm, 305 cm² Weight : 232 gr Height adjustable from 28 to 42 mm With addition of U-PH5 slope corrector, adjustable in height from 42 to 56 mm and slope from 0 to 5% MATERIAL Copolymer polypropylene (CPP) Composition: + / -80% first grade pre-selected recycled PPC, and + / -20% Talc + Masterbatch black Designed and manufactured in Europe Use of recycled materials exclusively of EU origin Resistant to weathering, sea salts, algae and a wide range of chemicals PACKAGING Pieces per carton : 24 pcs Carton weight : 6,07 kg Carton dimension : 600 x 400 x 120 mm Cartons per pallet : 80 pcs Pieces per pallet : 1920 pcs Pallet dimensions : 100 x 120 x 221 cm

Open the catalog to page 1

Aluminium Rail Holder Batten Holder Buzon pedestals can be used for a wide range of outdoor applications, such as terraces, pool decks and water features, in landscape areas and on rooftops... Finishing materials can be freely specified by the designer. Accessories are available for applications with various outdoor finishes, such as granite stone pavers, composite / timber decking, ceramic tiles and fibreglass or metal grating panels. Buzon pedestals can be installed on a wide range of solid and stable substrates, such as concrete slabs, cement screeds, waterproof membranes, insulation panels....

Open the catalog to page 2