Fit panels at lightning speed No unsightly screws or bolts Incredibly strong Perfect alignment Easy panel removal and replacement

How button-fix works The button Choose the Button to suit the screw type that works best with your panel material. Use lime green Buttons with Ø5mm countersunk wood screws. Use orange Buttons with Ø6.2mm Euro screws (to fit Ø5mm pilot holes). Lime green Button for use with Ø5mm countersunk wood screw Orange Button for use with Ø6.2mm Varianta Euro screw The Type 1 Fix connects parallel panels and is ideal for applications where strength and security are paramount. Engage the Buttons in the Fixes and slide the panel down by 15mm until Button-fix goes ‘click’. The Type 1 Fix can also be configured...

The Type 1 Flush Fix is for applications where panel–panel contact is required and fits a simple oval rebate. 15mm fall to engage panel It can be rebated into the edge of a panel of at least 28mm thick (as shown) or the face of a panel of at least 18mm thick. Type 1 bonded fix The Type 1 Bonded Fix is for applications where screw-fixing to the panel is not possible and bonding is the preferred option. As well as surface-mounting, the Fix may be rebated for additional strength and ease of alignment. The Fix is manufactured in ABS plastic and there are many structural adhesives suitable for bonding...

Panel fixing made easy Connects face-to-face Drop down or sideways engagement Push-on engagement (1) 10mm minimum with Varianta/Euro screws; 15mm minimum with wood screws (2) Minimum panel thickness 28mm when rebating into the edge of the panel (3) Type 1 Bonded test reports for specific adhesive/substrate combinations only Visit our website for more information, helpful videos and details of where to buy