Functions at a glance • Free programmable KNX touch display as room-integrated controlling, signalling and regulating unit. • To be used as indoor video station for the ABB-Welcome door communication system. • For the illustration and operation of the following KNX standard functions: - Switching Dimming - Slider - Blind - RGBW control element - Step switch - Scene switch - Display element - Audio control element • With scene function, logic functions, presence simulation and time programs. • Functions: - 480 KNX control elements - maximum 30 pages - 80 fault and alarm messages - 30 logic functions - 30 timers - presence simulation for 20 participants - 10 scene actuators Order details Article No.: Customs tariff number: Info sheet: - 1 RTC object • Equipped with a hearing loop for coupling the audio signal into hearing aids. • Page display with a maximum of 16 touch surfaces on one page. Instruction manual • External power supply: 20-32 VDC (SELV) or via the ABB-Welcome system controller. » Installation and operating instructions » Product manual • Consumer units: 15 • Control element: freely programmable touch surfaces • Display elements: Capacitive touchdisplay 1024 x 600 pixel • Rated voltage: 20 V-32 V• Protection class (device): IP 20 • Temperature range (device): 0 °C - 45 °C • Storage temperature range: -20 °C - 60 °C • Transport temperature range: -20 °C - 60 °C • Dimensions: (L x W x D): 165 mm x 246 mm x 25 mm • Mounting depth: 15 mm • Position for installation: Horizontal • Mounting height: 150 cm • For software and description please check the current Online-Catalogue. • Additional Power-Tool software necessary. Certificates » EU-declaration of conformity » ROHS product declaration Software » Licensing Terms :If the firmware is downloaded, the following licensing terms apply. , 12.05.2017 » Firmware :Busch-SmartTouch® Firmware , V 2.12, 08.02.2021 » Additional software :PowerTool , V 1.2.122, 17.09.2019 » ETS4/ETS5 application :Power-Tool application , V 1.0, 01.06.2017 » Licensing Terms :With the usage the following terms and conditions apply , 01.06.2017 » ETS5 Applikation :DCA Applikation , V 3.2, 27.11.2020 » Additional software :BJE Touch DCA , V 1.1.10.0, 26.02.2021 » Release Notes :Release Notes , V 5.0, 08.