Busch-free@homeTouch 7" indoor video station with 17.8 cm (7") touch display Functions at a glance • For ABB-free@home® and ABB-Welcome. • For the central control of up to 16 configurable ABB-free@home® functions of type: switching, dimming, blind, RTC, scene, Philips HUE. • Display of the video image of the outdoor station. During the conversation a picture of the visitor can be taken and stored in the picture memory. • For door calls during absence three pictures of the visitor are automatically stored in the picture memory. • With hands-free function, volume is adjustable. • Easy operation keys for door openers, mute function and light. • Different bell sounds are adjustable for door and floor ringing; five polyphone bell sounds are available. • Volume of bell sounds is adjustable. Order details Article No.: Customs tariff number: Info sheet: Downloads Instruction manual » CN, DE, EN, ES, FR, IT, PT • SD card slot for extension of the picture memory. • Suitable as room temperature controller extension unit (up to 8). • For surface mounting. Technical manual » System manual - DE » DE • The bus can be connected via enclosed terminal block. • Display size: 17.8 cm (7-inch). • Display resolution: 800 x 480 • Consumer units: 11 • Display elements: TFT Touch Display • Protection class (device): IP 30 • Temperature range (device): -5 °C - 40 °C • Dimensions: (L x W x D): 155 mm x 218 mm x 29 mm • Programming only with bus voltage applied via the web interface of the System Access Point. • Additional information about commissioning and operation is contained in the system manual and the online operating manual of the current Online-Catalogue. • The power is supplied by the ABB-Welcome system controller 83300. • When using the Busch-free@home panel without an ABB-Welcome system, a separate 24 Vpower supply is required (e.g. 6358-101) Certificates » EU-declaration of conformity » ROHS product declaration Software » Licensing Terms :If the firmware is downloaded, the following licensing terms apply. , 31.10.2014 » Welcome Firmware :ABB-free@homeTouch 7" , V 1.5, 06.08.2020 » free@home Firmware :ABB-free@homeTouch 7" , V 0.2.1356, 06.08.2020 » Installation Instructions , 31.01.2018 » Release Notes ,

View: frontal Wiring diagram