A1 LEG - multi-workstations Data sheet n° 013 Light grey A1 Leg Square arch leg • Desks are assembled with a common arch. This arch offers an ergonomic layout and the possibility of fitting a screen in the 3 cm gap between tops. • For a bench of 4 back to back desks and more, the recessed add-on arch leg to facilitate the transition from one workstation to another. Dimensions : • Common arch : D5 cm / L162,5 cm / H69,5 cm • Recessed arch : D5 cm / L128,5 cm / H69,5 cm • Lateral leg room : 45 cm; Distance between the legs : 63 cm • Material: lacquered epoxy finish metal • Type : Welded tube • Composition : square 50 mm section feet / H68,5 cm and square recessed upper plate of 45 mm section • Adjustment by levelling feet 50 mm diameter and allow up to 10 mm to correct the defects of flatness of the ground. Cable management: Optional cable channel to carry cable from desk to floor. • Material: Structurex®- MFC* • Thickness: 25 mm • Edging: 2 mm thick shock-proof ABS • Cable management: All desks are equipped with at least one cable port 80 mm diameter, delivered in Aluminium finish. Available in White or Anthracite finish on option. 160 Assembly: metal inserts screws Beam The beam is structural. • Material: lacquered epoxy finish metal • Dimension: 45 x 25 mm section • Connection : the 2 welded heads in the self-supporting beam fit into legs and are screwed • Height under beam: ± 64,5 cm Optional modesty panel: Structurex® or Plexi, it is attached under the top with lacquered epoxy finish stylish brackets, available in White or Anthracite finish. *Structurex®- MFC: Melamine-Finished Chipboard, decorative coating imitating a choice of wood species. Counter-balanced and treated against reflection. Density: 636 Kg/m³ (± 5%) for thickness 25 mm The data contained in this sheet was correct at the time of going to press. The data sheet is not systematically updated unless the basic characteristics of the product are modified. The manufacturer reserves the right to modify its products, without notice.