DISTRIB’GEL - Hydroalcoholic gel dispenser Your handy protection! Pedal-activated hydroalcoholic gel dispenser, to avoid any hand contact with the tower. Fully mechanical system Fully mechanical system fitted inside the column acting on the pump-bottle when the user’s foot presses the pedal, located in the lower part of the tower. Stainless steel dispensing head with drip plug in the top part of the tower. Dispenser suitable for all types of disinfectant liquid (solution or gel), with its 450 ml pump-bottle (included). Delivered ready to install. 2 metal accessories : support to display the user instructions and side shelf for a box of masks or gloves. Hydroalcoholic gel not supplied. All-metal construction with steel column and stainless steel head. Mechanical bottle anti-theft system built into the stainless steel head. Highly stable tower 4 mm thick metal base plate, dimensions 30 x 30 cm, for a highly stable tower. 4 non-slip pads. Quick and easy to install Easily installed in all indoor spaces (free-standing or attached to the floor). Pump-bottle easy to access and quick to fill. Rechargeable pump-bottle included 450 ml polyethylene pump-bottle supplied empty, rechargeable with all types of disinfectant liquid. Hydroalcoholic gel dispenser With support for user instructions and side shelf Overall dimensions : D30 x H120 x 33,5 cm How to disinfect your hands properly in 7 steps

DISTRIB’GEL - Hydroalcoholic gel dispenser Your handy protection! Support for user instructions 1 mm thick steel Stainless steel head with anti-theft system 1 mm thick Drip plug 1 mm thick stainless steel Support shelf 1 mm thick steel Column 2 mm thick steel tube, 9 x 9 cm Pedal-operated 2 mm thick stainless steel Base Dim. 4 mm thick steel, 30 x 30 cm DISTRIB’GEL - Technical description • Steel dispenser, 1 mm thick structure and 4 mm thick base, white epoxy finish (RAL 9003). Structure composed of a tubular square column, cross-section 90 x 90 mm, and a screwed base, cross-section 30 x 30...