VIHOR
14Pages

BUCK GmbH Taunustor 1 6031 0 Frankfurt am Main office@bucklicht.de www.buck.lighting tel +49.731.950.32.330 Copyright © 2018 BUCK VIHOR STREET LIGHTING Modularity Serviceability Diverse optics BUCK www.buck.lighting

Large number of available light distributions caters for all requirements defined by EN 13201 regarding the quality of traffic illumination, particularly that of M2-M6, C1-C5, P2-P6, SC2-SC9, EV2-EV6. LED street luminaire of high energy efficiency. Modularity, choice of 31 different lenses and different nominal powers enable continuous adjustment of power from 21W to 110W and flux adjustment from 2 798 lm to 12 585 lm. Lighting management and communication for smart energy consumption. ENERGY EFFICIENCY By choosing appropriate light distribution, depending on pole height and distance...

THERMAL MANAGEMENT Excellent thermal management is obtained with specially shaped housing, which promotes convective heat dissipation and prevents dirt deposition. Control gear compartment and light modules are separated, preventing heat transfer to the gear, ensuring longevity and reliability of the luminaire. The shape of cooling fins was inspired by natural shape of sand dune slopes.

MODULARITY Only one family of luminaires for illumination of different street types, regardless the speed limit, frequency etc., enabling the uniformity of street luminaires in the whole city area. TOTAL POWER (W) MIN/NOM/MAX.

PMMA lenses of high light transmission (95%) and a tempered, 4mm thick glass protector. Vast range of different powers and lenses cater for wide application in all types of outdoor illumination. The distribution of light is defined by lenses made of optical grade PMMA with high UV and temperature resistance, appropriate for high current and temperature conditions.These lenses allow better targeting of light rays so that the the light pollution and scattering to adjacent buildings are minimized. The lighting requirements that may occur in outdoor spaces such as roads, pedestrian zones,...

T2 OPTICS - BUCK VIHOR 12LED T2 CASE STUDY Application of VIHOR with fewer number of modules and T2 lenses enables excellent uniformity of illumination of narrow streets or pedestrian lanes. Additional savings are obtained by reduced height of poles and greater spacing between them. Hight: 8m, Overhang: 0m, Boom Angle: 10.0° Calculated values Required values according to class Fulfilled/Not fulfilled DWC OPTICS - BUCK VIHOR 24LED DWC Application of VIHOR with DWC lenses and incrementation in number of its modules maximizes the spacing between poles. The illuminated area extends to two- way...

ME OPTICS - BUCK VIHOR 32LED ME CASE STUDY Application of VIHOR with ME optics and large number of modules provides illumination for regional roads, highways and access roads, with several lanes in both directions. Meets the requirements regarding high levels of luminance and uniformity (as for classes M3 and M4). Hight: 10 m, Overhang: 1.5 m, Boom Angle: 0° Calculated values Calculated values Required values according to class Required values according to class Fulfilled/Not fulfilled FN OPTICS - BUCK VIHOR 16LED FN Specially designed for illumination of pedestrian crosswalk, VIHOR with FN...

The table compares the solution with existing luminaire using HQL 125W and the solution with VIHOR 12LED with standard tuning without optimisation and smart function and with standard tuning including all additional functions such as AOC, autonomous dimming, CLO. Installed power Yearly energy consumption Yearly energy consumption Maintenance cost Power savings Energy savings Existing: Street luminaire HQL 125W New: VIHOR 12LED without optimisation VIHOR 12LED with optimisation The table compares the solution with existing luminaire using HQL 125W and the solution with VIHOR 12LED with...

TECHNICAL DATA Dimensions A/B/H Ingress protection rating Impact resistance rating Finish Weight Ta Lens LOR Luminaire luminous flux (ta=25°) Total power LED efficiency Luminaire efficiency Luminaire LOR Light colour temperature /CRI LED service life Power supply Constant current range Control gear The housing of the luminaire is made of die cast aluminium, protected by epoxy powder coating resistant to UV radiation. Housing is modular and protected with 4mm thick tempered glass. Complete control gear is mounted on a carrier which can easily be replaced in the field.

STANDARD EQUIPMENT ADDITIONAL EQUIPMENT EASY SERVICEABILITY ACCESS TO ELECTRICAL COMPONENTS WITH BASIC TOOLS • Wireless interface communication • Programmable • AOC - Adjustable Output Current • CLO - Constant light output • Virtual midnight • Protection against transient main peaks up 6 kV • Electronic short-circuit protection • Overload protection • Thermal protection • Voltage range 198-264VAC • Safety swich • 1-10V analogue management • Power line communication • Central management • DALI communication • Protection against transient main peaks up 10 kV • Voltage range 150-264VAC The...

Easy access to electrical components. Inspection door serves as control gear holder, for quick replacement or upgrade to new generation. Mounting directly on arm Ø 60 mm (side entry 42- 60 mm). Possibility to perform maintenance by merely replacing the door with a spare one, using quick connectors, without interruption in illumination level or operation of the whole lighting installation. Mounting directly on the top entry Ø 60 - Ø 76 mm with adapter. Adapter angle adjustment mechanism SIMPLE UPGRADE Mounting on side entry Ø 60 - Ø 76 mm with adapter.

SMART CITY INFORMATION AND COMMUNICATION TECHNOLOGY (ICT) A smart city is an urban development vision integrating multiple information and communication technology (ICT) and Internet of Things (IoT) solutions in order to manage city assets (such as local departments’ information systems, schools, libraries, transportation systems, hospitals, power plants, water supply networks, waste management, law enforcement and other community services). Information and communication technology (ICT) is used to enhance quality, performance and interactivity of urban services, to reduce costs and...