2 WIRE Video Door Entry system LINEA 300 Monobloc pushbutton panels Front view Monobloc vandal-resistant 2 wire video pushbutton panels for flush mounted or wall mounted installation (with dedicated box sold separately). Solutions available with 1 to 32 call keys, with aluminium or stainless steel finishing front cover. The item includes: flush-mounted box, frame, colour video and audio electronic module, module/s and pushbuttons already wired. Presetting for the mounting of transponder reader or key switch. Backlit call keys. Visual and sound notification of the communication status for: call presence, system busy, door lock status. Direct control of an electric door lock 18 V - 4 A impulsive, 250 mA holding current (30 ohm max). Wall mounted box - for 4 keys set 308001 - 308011 Wall mounted box - for 8 keys set 308002 - 308012 Wall mounted box - for 12 keys set 308003 - 308013 Wall mounted box - for 20 keys set 308004 - 308014 Wall mounted box - for 32 keys set308005 - 308015 Relay to control door lock not managed by BUS additional 2 DIN modules power supply relay module to control door lock not managed by BUS SCS Related items Technical data Power supply from SCS BUS: Stand-by absorption: Operating absorption: Camera sensor: Camera lens: Resolution: Brightness adjustment: Night lighting: Operating temperature: Protection index: Mechanical impact: 1. Colour camera 2. White LEDs for the lighting of the camera shooting field 3. Preset housing for transponder reader or key switch 4. Door status notification LED: green LED = door open 5. Microphone 6. Name labels 7. Call key 8. Call status notification LED: green LED = call forwarded red LED = system busy 9. Communication status notification LED: green LED = communication active 10. Loudspeaker Dimensional data 2 - 4 calls pushbutton panels 308001 - 308011 dimensions: W 180 x H 270 mm Wall mounted box 308021 : W 178 x H 267 x D 40 mm Flush mounted box (supplied): W 128 x H 220 x P 53 mm 13 - 20 calls pushbutton panels 308004 - 308014 dimensions: W 180 x H 440 mm Wall mounted box 308024 : W 178 x H 437 x D 40 mm Flush mounted box (supplied): W 128 x H 400 x P 53 mm 5 - 8 calls pushbutton panels 308002 - 308012 dimensions: W 180 x H 330 mm Wall mounted box 308022 : W 178 x H 327 x D 40 mm Flush mounted box (supplied): W 128 x H 260 x P 53 mm 21 - 32 calls pushbutton panels 308005 - 308015 dimensions: W 340 x H 370 mm Wall mounted box 308025 : W 338 x H 367 x D 40 mm Flush mounted box (supplied): W 310 x H 328 x P 53 mm 9 - 12 calls pushbutton panels 308003 - 308013 dimensions: W 180 x H 360 mm Wall mounted box 308023 : W 178 x H 357 x D 40 mm Flush mounted box (supplied): W 128 x H 310 x P 53 mm

LINEA 300 Monobloc pushbutton panels Rear view The device must be physically configured as follows: P - entrance panel number The configurator connected to the P housing of the speaker module assigns to the same an identification number within the system. The numbering of the entrance panels must always start from P=0. The EP configured with P=0 must be a common (or main) EP. N - call number It assigns the correspondence between the entrance panel call keys and the handsets or video handsets. In common entrance panels made using key modules, N in the speaker module must be configured with 0....