A.4 Technical Sheet Sliding, Folding & Shading Elements
15Pages

Sliding, Folding & Shading Elements CELLON® design, classic Technical data sheet for planning, construction and execution

Technical data sheet | Sliding, Folding & Shading Elements Table of Contents General Information Material Panel Formats Data Transmission for Orders Storage and Cleaning Instructions Cutting and Drilling Guidelines Fastenings Fastening Distances Fasteners Substructure Substructure for Screwed Panels Substructure for Clamped Panels Substructure for Plugged Panels Construction Solutions Window Shutters Sliding Shutters Folding Sliding Shutter

Technical data sheet | Sliding, Folding & Shading Elements General Information Material Our CELLON® panel is a high-pressure laminate panel (HPL Compact or solid core panel) consisting of 70% cellulose webs and 30% phenolic resin. The extremely weather and frost-resistant material is ideal for outdoor applications. Application area: Panel thickness (weight): Reaction to fire class: mounted vertically in outdoor areas (e.g. facades, balcony railings) 8mm (approx. 12kg/m²), 10mm (approx. 15kg/m²) RF2, B1 (DIN 4102-1), B-s1-d0 (EN 13501-1) The raw panels are project-specifically cut to the...

Technical data sheet | Sliding, Folding & Shading Elements General Information Data Transmission for Orders Please note the following when placing an order: Data Format DWG / DXF Data Cadwork 2D or 3D Data Parts lists in Excel (if only as Excel without CAD file is sent, it might result in additional work in our work preparation) Data Content and Structure Panels are drawn on a separate layer Drawing in 1:1 ratio Measurement of at least one long and short side to be able to verify the scale Boreholes (drawn as a closed circle), cut-outs, etc. are marked accordingly Special requests for...

Technical data sheet | Sliding, Folding & Shading Elements Fastening Distances Single-span borehole Ø 8 mm can be drawn directly in DXF/DWG file d Maximum distance according to wind load qek (wind pressure or suction) Distance borehole to edge Horizontal borehole distance Vertical borehole distance Frame without perforation Reciprocal conversion: c (adjusted) = b (max) / b (effectiv) x c (max) b (adjusted) = c (max) / c (effectiv) x b (max) The values given are guidelines and do not release you from having an object-related inspection carried out by a qualified engineer. Test results for...

Technical data sheet | Sliding, Folding & Shading Elements Fasteners Metal Substructure Truss-head Screw Material: Length: Nominal diameter: Head diameter: Drives: Borehole diameter: (self-drilling with sealing washer) Bi-metal (Stainless steel A2/Steel) 26 mm / 38 mm 5.5 mm 14 mm SIT® 25, TX 25 8 mm Blind Rivet Material: Length: Nominal diameter: Head diameter: Drives: Borehole diameter: Aluminium/Stainless steel A2 8-13 mm 5.0 mm 14 mm Blind rivet tool 8 mm Note Screws and rivets are to be placed concentrically in the drilled holes. NO COUNTERSUNK SCREWS MUST BE USED!

Technical data sheet | Sliding, Folding & Shading Elements Substructure for Screwed Panels at the Edge Substructure for Clamped Panels at the Edge Substructure for Plugged Panels at the Edge

Technical data sheet | Sliding, Folding & Shading Elements Construction Solutions For the play of light and shadow. CELLON® design panels are very well suitable for sliding or folding applications. The customized panels are fixed on a metal frame, which is directly installed on the facade with the respective sliding or folding fittings. Due to the low weight of the perforated CELLON® panels (ca. 7-9kg/m2) the handling of the elements is as easy as it can be. CELLON® design Metal Frame Sliding/ Folding Fittings

Technical data sheet | Sliding, Folding & Shading Elements Construction Solutions Window Shutters Conventional Wall Mounting Wall Mounting The pintels are the fixed part of the “hinge”, which provides the pivot point of the sash. Depending on the structural conditions, different pintels must be used. These must always be mounted tightly with the product-specific specifications of the manufacturer being observed. Frame Mounting Hinge The hinges are the counterpart of the pintel. They are attached to the frame of the folding shutter. Here, too, there are different designs and manufacturer’s...

Technical data sheet | Sliding, Folding & Shading Elements Construction Solutions Sliding Shutters Simple Sliding Element Ceiling and Floor Mounting Wall Mounting

Technical data sheet | Sliding, Folding & Shading Elements Construction Solutions Symmetrical Sliding Element Ceiling and Floor Mounting Wall Mounting

Technical data sheet | Sliding, Folding & Shading Elements Construction Solutions Telescopic Sliding Element Ceiling and Floor Mounting Wall Mounting

Technical data sheet | Sliding, Folding & Shading Elements Construction Solutions Folding Sliding Shutter Ceiling and Floor Mounting Wall Mounting Folding Hinges Options

Technical data sheet | Sliding, Folding & Shading Elements You can find the entire perforation collection in our catalogue.

Bruag Design Factory AG Switzerland +41 71 414 00 90 info@bruag.ch www.bruag.ch