2_1 Interior Applications - Partitions and Room Dividers Technical Sheet
9Pages

{{requestButtons}}

Catalog excerpts

2_1 Interior Applications - Partitions and Room Dividers Technical Sheet - 1

Partitions Room Dividers MDF, Plywood and CELLON® Partitions and Room Dividers Version 1.0 General Information MDF and Plywood Individual panel segmentation within the following design sizes: Grain direction CELLON® Individual panel segmentation within the following design sizes:

Open the catalog to page 1
2_1 Interior Applications - Partitions and Room Dividers Technical Sheet - 2

Our CELLON®-panel is a Compact High-Pressure Laminate Panel (HPL) consisting of 70% cellulose sheets and 30% phenolic resin. The weather-resistant material is ideally suited for external as well as internal applications. The unprocessed panels are manufactured exactly as required for each individual project using laser technology. The panels are thus pre-cut to the exact dimensions (including drill holes) having the desired perforation for the specific site. The panels are painted after cutting. Depending on the perforation and the distance between the fixing points, 8 or 10 mm thick panels...

Open the catalog to page 2
2_1 Interior Applications - Partitions and Room Dividers Technical Sheet - 3

Important Note on the Storage/Sorting of CELLON® CELLON® façade panels must never be stored outside in unprotected flat/horizontal position during sorting. Paint damage may occur, if water remains on the panels in a horizontal position*! Please store upright in a protected location and always place the supplied, dry PU-foam foils between the individual plates. Should the intermediate foil get wet, please use new foil. * Rainwater passes through the coating of the CELLON ® panel and cannot penetrate the panel further. This may lead to softening of the coating. This is not the case for...

Open the catalog to page 3
2_1 Interior Applications - Partitions and Room Dividers Technical Sheet - 4

19 mm MDF or 18 mm Plywood Partition Wall System Complete perforated MDF or plywood panel system. Stand consisting of 2 chrome steel plates and a section in which the plates are fixed. Free choice of perforation and colour. Depending on the dimension, the top of the panel may slightly flex. Maximum Formats

Open the catalog to page 4
2_1 Interior Applications - Partitions and Room Dividers Technical Sheet - 5

Individually customisable wall elements for niche paneling. Fixing by means of clamps, profile bars or angled sections. Fixings must be supplied by the contractor. MDF 19 mm clamped with profile bars MDF 19 mm fixed in wall recess using L-profile I MDF 30 mm fixed using Velcro e.g. 3M 457 D Maximum Formats

Open the catalog to page 5
2_1 Interior Applications - Partitions and Room Dividers Technical Sheet - 6

Delicate CELLON® screening elements. The elements can be mounted in solid wood or metal frames for an attractive look and sufficient stability. I^^^^SSSSSJSSSSSJSJJJSJJJJJ; ■ MsMia XSHgBS HwwiSSRJv' I MrtWWWM W : HS*S*Sr>iS*W' Jc-4r Potential design detail using a solid wood frame

Open the catalog to page 6
2_1 Interior Applications - Partitions and Room Dividers Technical Sheet - 7

Partitions without Substructure We recommend to design partition wall elements in 30 mm MDF without additional substructure. Additional frames or support structures must be designed for CELLON® or 19 mm MDF partitions. This always depends on the dimensions and the type of perforation. Potential Fixing Options U-Profile Fixing Grooved Strip Fixing T-Profile Fixing

Open the catalog to page 7
2_1 Interior Applications - Partitions and Room Dividers Technical Sheet - 8

Details Panel Connections MDF Connections Lamello (dowel system) connectors can be integrated into panels at the joints for elements made from several parts of MDF. A milling depth of 12 mm is required either side for the milling operations. The pattern may need to be adjusted slightly at these points. CELLON® steel bolts CELLON® Connections 12 mm steel bolts can be integrated into the front of the panel at the joints for elements made from several parts of CELLON®. This ensures that the panels are level. Edge Properties The laser cut results in black edges. It is not possible to completely...

Open the catalog to page 8
2_1 Interior Applications - Partitions and Room Dividers Technical Sheet - 9

Bruag AG Bahnhofstrasse 8 8594 Guttingen Switzerland

Open the catalog to page 9

All Bruag Design Factory AG catalogs and technical brochures

Archived catalogs