*myarchiexpo

Tungsten Gas

Product catalog summary

Product Overview: The document describes a range of cost-conscious outdoor gas radiant heaters that blend aesthetics with functionality. The heaters feature a patented direct ignition system, ensuring reliable operation even in winds up to 12km/h. They are designed with an easy pivot arm for versatile positioning and heat coverage.

Product Specifications: The heaters are available in two series: 300 and 500. The 500 Series heats approximately 20m2 with 42Mj/39,800 BTU, while the 300 Series heats approximately 15m2 with 25Mj/23,600 BTU. Both series offer various power options ranging from 1500W to 6000W, heating areas from 6m2 to 15m2.

Features: Key features include a universal bracket for easy upgrades, bi-directional pivot arm with 25° rotation, electronic ignition for simultaneous operation of multiple units, automatic re-ignition with safety shut-off, and stainless steel casing for protection against tampering and dirt accumulation.

Installation Requirements: The heaters must be installed by a licensed technician following the AS5601 installation code. Minimum installation clearances are specified, with wall mounting and ceiling pole options available. Accessories such as dual-directional ceiling poles and heat deflectors are sold separately.

Technical Details: The document provides detailed dimensions, weight, gas and electrical connection specifications, and mounting height requirements. The 300 Series weighs 14kg, while the 500 Series weighs 18kg. Both require a 240 Volt, 3-pin insulated plug for electrical connection.

Contact Information: Bromic Heating's head office is located in Sydney, Australia, with contact details provided for both domestic and international inquiries.

Catalog excerpts

A designed, cost-conscious product blending aesthetics and function A designed, cost-conscious product range that does not sacrifice aesthetics for function. The patented direct ignition system, never before seen on an outdoor gas radiant heater, ensures a reliable start and effective operation, even in winds of up to 12km/h. Easy pivot arm provides greater positioning versatility and heat coverage.

Open the catalog to page 1

Heats approx. 20m2 42Mj heating power wiring required. ▪▪ Universal bracket — easy upgrade from 300 to 500 model. No additional plumbing or ▪▪ Bi-directional easy-pivot arm — 25° rotation each side. Electronic ignition — one or multiple units can be switched on and off simultaneously from a single remote-located switch. 3m / 8’ Automatic re-ignition — should the heater not re-ignite for any reason, the integrated “Flame Failure safety Shut-off Control” turns the heater off immediately. Heats approx. 6m2 / 64.4ft2 Stainless steel casing — components are protected from tampering. Assists in preventing...

Open the catalog to page 2

Tungsten Gas

Tungsten Gas

Catalog excerpts

All Bromic Heating catalogs and technical brochures